What's new

Question about platinum and how it reads on an Explorer SE

mr_larry

Hero Member
Joined
Jun 22, 2010
Messages
504
Reaction score
169
Golden Thread
0
Location
Northern California
Detector(s) used
Minelab Explorer SE Pro
Primary Interest:
Metal Detecting
I was detecting a beach yesterday when a woman approached me and told me she lost her platinum/diamond ring in the surf on Thanksgiving. Apparently she was throwing some flowers in the surf and her ring flew off her finger. I spent an hour looking for the ring yesterday but the tide was coming in pretty quickly after about an hour, so I gave up and moved to higher ground.

I plan on heading back out there today with a nice minus tide this afternoon. I was wondering if anyone could give me any guidance on the numbers that might show up for a platinum ring. I was looking at this chart: http://environmentalchemistry.com/yogi/periodic/electrical.html
and I see that platinum appears to be a rather poor conductor of electricity. Can anyone give me an idea of the numbers that might read out? I suppose on the Smartfind screen that the crosshairs would be all the way in the bottom right hand corner, is that correct?

Any help would be appreciated...
 
I found one platinum ring about 2 years ago, it rang up as junk. the guy that lost his ring was able to pinpoint where he lost it within about a 40 sq ft of snow, I just got lucky, if I would have been just hunting, I probably wouldn't have dug it
 
its will be higher in smart screen then foil is for sure, go to the jewelry shop and ask :notworthy: to check platinum rings on your explorer -its will help you to concentrate and make faster search. good luck if women was not joking Stasys
 
Trouble is most Platinum rings aren't 100% pure Platinum and are alloyed with other metals which can give readings all over the place from foil to dime. That is another reason I hate meters as you tend to forget that they lie to ya. :coffee2:
 
Thanks for all the input. I have not yet been back out due to the cold and the rain, but I am thinking of making a trip tomorrow afternoon. Since it is the beach I will just dig all targets and hope to get lucky on the ring. There should be some sunshine tomorrow that will take the edge off of the cold temperature.
 
11gr PT950: Fer=09 Cond=10................ Explorer SE

I hunt Almetal digital screen since I can see the numbers best and dig just about everything from 15/00 down....ring pic's from the first few years of water hunting.... all found with the excalibur
Men's Tiffany's Wedding Band - Med/11gr PT950: Fer=09 Cond=10 not shown
 

Attachments

  • DSC_9526.webp
    DSC_9526.webp
    85.3 KB · Views: 230
  • DSC_9555cu.webp
    DSC_9555cu.webp
    148 KB · Views: 263
  • DSC_9526.webp
    DSC_9526.webp
    85.3 KB · Views: 248
I OWN AN EXTERRA 505
HERE ARE SOME OF THE DIGITAL READINGS FOR VARIOUS METALS


18 CT GOLD 30
9CT RED GOLD 27
18CT GOLD 21
9CT GOLD 21
9CT BANGLE 15
SA COIN R2-00 39
SA BIMETAL R5 COIN 27
LEAD 36
SOLID BRASS 45
SILVER 33
PLATINUM RING 15
PLUMBING PIPE FERROL BRASS 33



THE 505 WORKS WONDERS FOR ME. THE XCALLIBER 1000 ARE JUST TWICE AS POTENT
 
Re: 11gr PT950: Fer=09 Cond=10................ Explorer SE

OldeBeechnut said:
I hunt Almetal digital screen since I can see the numbers best and dig just about everything from 15/00 down....ring pic's from the first few years of water hunting.... all found with the excalibur
Men's Tiffany's Wedding Band - Med/11gr PT950: Fer=09 Cond=10 not shown

Wow thanks for that picture. What an impressive assortment of finds!
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom