Show me your homemade prospecting tools!

[oidium45]

Hello everyone!

Recently, due to funding issues I have resorted to making my own prospecting tools. Even some of my own camping gear! As it turns out.. It is a rather fun learning process and pretty damn fulfilling! I am curious to see what everyone here has created in their years of prospecting. Please, use this post to share your creativity with the rest of us!

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[Capt Nemo]

Model 1,2,3,4 recirculating fluid beds. (4 worked best)


Model 5 recirculating fluid bed highbanker.


Miller table.


Grease table.


Bucket Buddy


Bucket Buddy II fluid bed concentrator.

 

[okbasspro]

My 3” triple that’s homemade. Sits on a stand for shallow water not floats.

 

[ratled]

Cobbled a nice little powered sluice. Runs on a WX 10 or larger. Search "ratleds highbanker" for the full build

 

[winners58]

Laundry soap bucket for my power sluice header...
.
.
.
.

*sluice stand/legs removed seat from an elder care bath chair.

 

[oidium45]

Model 1,2,3,4 recirculating fluid beds. (4 worked best)
View attachment 1721937

Model 5 recirculating fluid bed highbanker.
View attachment 1721927

Miller table.
View attachment 1721929

Grease table.
View attachment 1721931

Bucket Buddy
View attachment 1721939

Bucket Buddy II fluid bed concentrator.
View attachment 1721933

Nice! I do not think I have ever seen a grease table.

 

[oidium45]

Laundry soap bucket for my power sluice header...
.
View attachment 1722148 . View attachment 1722149
.
View attachment 1722151 . View attachment 1722150

*sluice stand/legs removed seat from an elder care bath chair.

If you ever want to smooth out that water flow I leaned a nice trick watching vids. Make the area where the water spills in deeper than the rest of the sluice. It will fill up then spill over and create a much smoother flow.

 

[RTR]

Hello everyone!

Recently, due to funding issues I have resorted to making my own prospecting tools. Even some of my own camping gear! As it turns out.. It is a rather fun learning process and pretty damn fulfilling! I am curious to see what everyone here has created in their years of prospecting. Please, use this post to share your creativity with the rest of us!

Nothing wrong what-so-ever with DIY stuff.I love it ALL ! and yes I even drive it !
<<<< as pictured here

 

[DizzyDigger]

Made quite a bit of my own equipment. Always more gratifying
to catch gold using something you fabricated yourself.

Miller Table: http://www.treasurenet.com/forums/gold-prospecting/368781-building-miller-table.html

Mass Quantity Classifier: http://www.treasurenet.com/forums/gold-prospecting/404814-building-oversized-classifer.html

Where I prospect: (click on image for full size) http://www.treasurenet.com/forums/my-daily-snapshot/373680-valley-shadow.html

Classifier for a Gold Cube: http://www.treasurenet.com/forums/gold-prospecting/418737-punch-plate-template-stencil.html

Got a whole pile of home made crevasing tools.

 

[BillA]

hey DD, snap a photo of your crevassing tools

 

[russau]

I would EXCEPT being a F.O.G. and cant get out much anymore I ended up selling it for a song ! and I HATED doing so !

 

[BillA]

I would EXCEPT being a F.O.G. and cant get out much anymore I ended up selling it for a song ! and I HATED doing so !

seems a recurring theme, downsizing for us oldsters is a real bugger; I'm 74 and still buying/building "poop" (time structuring)

 

[DizzyDigger]

hey DD, snap a photo of your crevassing tools

Pretty basic stuff Bill. Long handled teaspoons, short-handled sledge hammer,
a few different rock chisels, various lengths of heavy wire for reaching way
down in the cracks.

I'm more of a bedrock buster than a crevasser, but I'll never pass up a
deep crack if I can fit anything in there to scoop out the material.