xracer550
Full Member
- Joined
- Oct 31, 2012
- Messages
- 170
- Reaction score
- 527
- Golden Thread
- 0
- Location
- Palmdale , CA
- Detector(s) used
- Goldbug 2
- Primary Interest:
- Prospecting
- #1
Thread Owner
I have never used a trommel before , Almost all the gold mining shows have trommels or a shaker deck so I had a go at building a small portable trommel that is easy to move around , I am not good at typing so I will just put some pic. (worth 1000 words) & let you pick it apart , Drive is 12v gear motor 15 rpm with speed controller , 6 1/2" barrel 17" long (super quiet) I use a 2000gal pump . anyway here are some photos=
All the parts ready for assembly =
Transport mode = by Truck
Transport mode= By hand with front legs folded
standing on it's own legs =
Test mode =
Results = I ran the top 1" of dirt from all around the test zone (I had a spill a while ago) to see if I missed anything , Yes I did but not much , Overall works great not much water loss & it found some Gold!
All the parts ready for assembly =
Transport mode = by Truck
Transport mode= By hand with front legs folded
standing on it's own legs =
Test mode =
Results = I ran the top 1" of dirt from all around the test zone (I had a spill a while ago) to see if I missed anything , Yes I did but not much , Overall works great not much water loss & it found some Gold!
Last edited:








