Todays finds - old park

Clad Crusader

Full Member
Joined
Nov 16, 2020
Messages
126
Reaction score
847
Golden Thread
0
Location
Peoria, IL
Detector(s) used
Nokta Makro Legend
Garrett AT Pro
Primary Interest:
Metal Detecting

Attachments

  • 35656D04-52A0-41DD-A0A1-17BD5CE7605F.webp
    35656D04-52A0-41DD-A0A1-17BD5CE7605F.webp
    166.7 KB · Views: 292
Upvote 24
I’m an AT Pro fan, myself, and had the darndest time learning to ground balance with the Legend. Because the Pro ground balance button is on the lower right, I kept turning the unit off. All in all, the Legend is quite a machine.
I'm essentially going back over spots I gridded off with the AT Pro standard coil. Using the M1 program I am pulling a lot of old coins. My biggest struggle with the Pro is it falsing on iron at depth and digging lots of deep holes to just find a nail. However, with the Legend when I get a repeatable deep signal it ahs usually been something good. This weekend plan to re-grid the same area I just did with the M1 program but using the M2 program and see what else/different it locates. Still learning...
 

I'm essentially going back over spots I gridded off with the AT Pro standard coil. Using the M1 program I am pulling a lot of old coins. My biggest struggle with the Pro is it falsing on iron at depth and digging lots of deep holes to just find a nail. However, with the Legend when I get a repeatable deep signal it ahs usually been something good. This weekend plan to re-grid the same area I just did with the M1 program but using the M2 program and see what else/different it locates. Still learning...
I agree with your assessment of the AT Pro, my AT Max does the same on deep iron. The thought of a Re-grid of all my old spots is depressing.
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom