vabuckhunter
Sr. Member
I have read countless comparisons and all are different, some say neither are better than the WS4s. Whats yalls opinions on them?
I have read countless comparisons and all are different, some say neither are better than the WS4s. Whats yalls opinions on them?
Yes I do Vino, thanks again for everything.
Awesome job on all the phones that I've seen. I am still not sure how you all notched the headphones to accommodate the adapter, but I am sure that it isn't too complicated.
I marked the hole locations with a scribe then used a drill to start from and then a Dremel Tool to open the hole up and make a slot. I made the slots one at a time and slowly opened them up until tab dropped in. On mine the tabs don't actually lock the adapter in place but they do add some stability. The screw is what hold the adapter in place and I also put some epoxy in the holes to make it more secure.
You can see in this picture the holes for the tabs are a little over-sized, I just filled that in with epoxy after I made sure everything was were I wanted it and working.
View attachment 1117329
Thanks. I have an older set of modified Killer Bees that I am going to cut slots into to accommodate the adapter.