mastereagle22
Silver Member
- Joined
- May 15, 2007
- Messages
- 4,909
- Reaction score
- 31
- Golden Thread
- 0
- Location
- Southeast Missouri
- Detector(s) used
- E-trac, Explorer II, Xterra30, Whites Prizm IV
Where's the freaking silver?
Hey everyone
Tonight Baldingboy and I went out to detect for a few hours. The Beast indicated silver at 10-11 inches! This area is old so silver at that depth would not be unheard of. BB swung his XLT and it indicated "something" might be there, it bounced around silver dollar, silver half at 10 inches. Well I opened up a plug and swung the Explorer over the hole and the plug, nothing!
Same for BB. Dug down about 6 inches and still nothing. Filled the hole back in and what do you know, the signal was back! We dug a ten inch hole by about one foot across and we could not find the signal. We passed out detectors over the dirt and the hole with no signal. Even used my Bullseye II on the dirt with no results. Filled the hold back in and the signal came back! The Explorer indicated Silver, upper right corner only one box high flute sound. So where is the freaking silver? Or is my machine just defective, or is the user a total idiot? Or is it all of the above?
This is really getting old and I am just about to find a new hobby. Can someone help and explain?
Hey everyone
Tonight Baldingboy and I went out to detect for a few hours. The Beast indicated silver at 10-11 inches! This area is old so silver at that depth would not be unheard of. BB swung his XLT and it indicated "something" might be there, it bounced around silver dollar, silver half at 10 inches. Well I opened up a plug and swung the Explorer over the hole and the plug, nothing!

This is really getting old and I am just about to find a new hobby. Can someone help and explain?
Upvote
0