whites coinmaster gt noise

[1637]

so this machine used to work well, but after not being used for a long time.its to loud to use if i tap the coil on the ground it gets better for a short time, can it cut the coil apart and use sometime like electrical contact cleaner on it thank you

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[vpnavy]

...to loud to use if i tap the coil on the ground...can it cut the coil apart and use sometime like electrical contact cleaner...

Until a member(s) pipes in - you might consider posting your request on COINMASTER for additional exposure...

 

[DizzyDigger]

so this machine used to work well, but after not being used for a long time.its to loud to use if i tap the coil on the ground it gets better for a short time, can it cut the coil apart and use sometime like electrical contact cleaner on it thank you

I'd start by making sure the battery terminals are clean, as well as the connector into the housing from the coil.

 

[pepperj]

so this machine used to work well, but after not being used for a long time.its to loud to use if i tap the coil on the ground it gets better for a short time, can it cut the coil apart and use sometime like electrical contact cleaner on it thank you

Has it got a coil cover on it?
If so take it off and clean the coil of any sand/dirt.
Inspect the coil for a crack as moisture can cause an issue in the coil as well.

 

[1637]

no coil cover,so i cleaned all the contacts,new batterys.took the coil cable off and cleaned it. now it works good, but still need to test it at a park, thanks for all the good ideas.