Xp deus 2 WS6 Retroiluminacion de pantalla

[Jimmysola]

Hi everyone! In case anyone’s interested, I fitted a backlight to my WS6 so I can read the screen at night or underwater. I also 3D-printed a waterproof housing using a file I bought online and modified before printing. If you’re interested, I’d be happy to share more details about the WS6 Evo.
I’ve set the backlight to a low brightness so it uses very little battery power and keeps glare down at night.

 

[pepperj]

¡¡Buenas!! Por si le interesa he colocado una placa fotoiluminada en el ws6 para poder ver la pantalla de noche o bajo el agua ya que se imprimió una carcasa estanco de un archivo adquirido por internet previamente modificado. Si a la gente le interesa puedo enviar info de ws6 evo.
La luz esta ajustada para que apenas gaste bateria y en la noche no refleje de mas .

Hi there!! In case anyone is interested, I installed a backlit plate in the WS6 so I can see the screen at night or underwater, since I printed a waterproof housing from a file I bought online and previously modified. If people are interested, I can send info about the WS6 Evo.
The light is adjusted so it barely uses any battery and doesn't glare too much at night.
Would you like me to adjust the tone of this translation (such as making it more formal or casual for a specific forum) or help translate any follow-up details about the WS6 Evo?

 

[Jimmysola]

Así está bien gracias!!!

 

[pepperj]

Así está bien gracias!!!

Sería mejor si tradujeras tus respuestas en inglés.

 

[Jimmysola]

Hi everyone! In case anyone’s interested, I fitted a backlight to my WS6 so I can read the screen at night or underwater. I also 3D-printed a waterproof housing using a file I bought online and modified before printing. If you’re interested, I’d be happy to share more details about the WS6 Evo.
I’ve set the backlight to a low brightness so it uses very little battery power and keeps glare down at night.

 

[Jimmysola]

🙏