gravediggermax-vabeachva
Bronze Member
- Nov 24, 2005
- 2,027
- 474
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- se pro, excal. II, ctx 3030
- Primary Interest:
- All Treasure Hunting
I want to share some information and pictures with you regarding the new T- Rex scoop made by GoldDiggerMetalDetectors – Ron DeGhetto in New Jersey.
These scoops are small square hole scoops -a newer model than the original model which was 9 -1/2” wide – the newer model is 8” wide and 11” deep.
Ron calls one the dry sand model and the other the wet sand model. The only difference in the two scoops are the tops.
The dry sand model has a shorter top than the water version –both are very very heavy duty.
Here is a quote straight from Ron:
.
I over build my scoops. The 8” drywould do well in wet sand but the top is only 3 ½ inches deep. Not good in thesurf.
Ron
.
Good luck to everyone – see ya soon – Vid is like: 7 Mins– many pics at the end.
.
.
.
http://www.youtube.com/watch?v=0gFPCdwrvFU
These scoops are small square hole scoops -a newer model than the original model which was 9 -1/2” wide – the newer model is 8” wide and 11” deep.
Ron calls one the dry sand model and the other the wet sand model. The only difference in the two scoops are the tops.
The dry sand model has a shorter top than the water version –both are very very heavy duty.
Here is a quote straight from Ron:
.
I over build my scoops. The 8” drywould do well in wet sand but the top is only 3 ½ inches deep. Not good in thesurf.
Ron
.
Good luck to everyone – see ya soon – Vid is like: 7 Mins– many pics at the end.
.
.
.
http://www.youtube.com/watch?v=0gFPCdwrvFU
