Don In South Jersey
Sr. Member
- Joined
- Sep 3, 2005
- Messages
- 341
- Reaction score
- 96
- Golden Thread
- 0
- Location
- Southern NJ
- Detector(s) used
- CTX 3030
Pro-Find
- Primary Interest:
- All Treasure Hunting
Well I went & finally got my new detector & was eager to get it out for a test. I went to a house that was abonded & a park that I frequent. I used the stock coil & a sunray probe.
At the house, I found an old padlock & a 1918 wheat, & an old spoon. I was digging 7,8,9 inch signals & I have to invest in a new shovel, the detector is finding coins deeper than I can dig. I don't recall digging this deep before.
At the park, I found alot of clad coins, a plated pendant, & a 1953 dime 7 inches deep.
I read so many posts of how deep this machine goes, but until you get one in your hands, dig a signal, dig a 6 inch plug, & the coin is still deeper is crazy.
I don't feel the machine is too hard to understand. I had a Dfx for years, & there is a 1/3rd less controls to worry about.
At the house, I found an old padlock & a 1918 wheat, & an old spoon. I was digging 7,8,9 inch signals & I have to invest in a new shovel, the detector is finding coins deeper than I can dig. I don't recall digging this deep before.
At the park, I found alot of clad coins, a plated pendant, & a 1953 dime 7 inches deep.
I read so many posts of how deep this machine goes, but until you get one in your hands, dig a signal, dig a 6 inch plug, & the coin is still deeper is crazy.
I don't feel the machine is too hard to understand. I had a Dfx for years, & there is a 1/3rd less controls to worry about.
Attachments
Upvote
0
