Any leads on low profile miners moss?

[Usaflaginmaine]

Hi friends. Wondering if anyone has a lead or source on low profile miners moss? Possibly looking for 1/16"-1/8" in thickness. The 3/8" is too thick for what I wamt.

 

[Nitric]

This might be a little hack? But I had built a real small sluice for glacier gold. I just used what was around the house...I ended up using 3M scotch brite pads. It worked! I can't compare it to miners moss since I've never had any....But would probably work in a pinch and can be bought at Home Depot in the paint section...It's also about an 1/8 in thick or a little less..... At the time I was doing paint work, and hanging out in a friends body shop..so, there was an endless supply laying around..

 

[Usaflaginmaine]

Found some

 

[fmrUSMC_0844]

Their website doesnt seem to work. I just got a piece of miners moss 6 x 12 inches and its almost half an inch thick. Way too thick to put under the riffles of my A52!

 

[russau]

Why not modify the height of your riffle sections hole that secures the riffles . then you could use whatever you want.

 

[wingmaster]

Is the moss that Gold Hog sells too thick? I remember that stuff wasn't as thick as others out there.