Aquapulse voltage

Octopulse

Full Member
Mar 13, 2010
148
82
Perth
Detector(s) used
Current detectors;
Minelab Excalibur II
Garrett XL500 “Super Pulse”
White’s MX7
White’s XL PRO
Primary Interest:
All Treasure Hunting
Jason (or others)

My new Aquapulse (compact) comes off the charger fully charged with a max voltage of about 11V.

Does this seem about right as the user manual says it should be nearer 13V but maybe this is for the older 10 x AA packs. The newer packs are 8 cells which i know are 1.2V per cell but charge to a nominal voltage of about 1.35V each......so 8 x 1.35 gets close to the 11V.

Thanks for any help,
Tony.
 

OP
OP
Octopulse

Octopulse

Full Member
Mar 13, 2010
148
82
Perth
Detector(s) used
Current detectors;
Minelab Excalibur II
Garrett XL500 “Super Pulse”
White’s MX7
White’s XL PRO
Primary Interest:
All Treasure Hunting
Well it appears my multimeter was in need of a new 9V battery and as a result was giving erroneous readings.......

Tony.
 

SADS 669

Bronze Member
Jan 20, 2013
2,454
3,736
Long Island, Bahamas
Detector(s) used
Tesoro Sand Shark....Aqua pulse 1B....Equinox ll
Primary Interest:
Shipwrecks
Well it appears my multimeter was in need of a new 9V battery and as a result was giving erroneous readings....... Tony.
Tony,

I did that with my lawn mower today, I tried for about 5mins before looking in the gas tank, Duh........
 

quicho1961

Greenie
May 15, 2007
10
6
I replace the old battery pack of NiCd with three 3.7 volts, 4000mH homemade battery pack, delivering 11.1 volts with a continus performance over 20 hours of use and there still running 100%
 

Top Member Reactions

Users who are viewing this thread

Top