Arizona Dowsed treasure lead

When I returned for a second time, Dowsing power was bad. At that time I was still learning, I dug one hole down to granite, and it was very close to the area you both marked. Awesome! I would dowse it differently next time. I didn't bother dowsing the vein dimensions or depth, power sucked.. The tailing piles from old mines were on the S side of the wash up on the mtn.
 
Did I show this one yet? This is near Stanton on a Weaver claim. Standing about were the red dot is, in all directions 360 degrees was only one Gold signal, using my 17 inch rods, that only Dowse big quantity. I didnt go down and Dowse above to see if it's a vein or big piece or check depth, because someone was dry washing righ near it. I had though of returning to see. The area and creek is giant boulders. Do you guys see anything?
 

Attachments

  • 20211111_101644.webp
    20211111_101644.webp
    127.4 KB · Views: 73
First check, was getting an area west/northwest of your circle.
I can remember reading a story in the old treasure magazines, about the granite boulders at Rich Hill. A treasure hunter cracked open a rock (small boulder size) and recovered a nice gold nugget.
 
Stanton area has been really hammered. Right next to the road, someone with a deep Minelab detector dug a huge gold nugget.
 

Attachments

  • 20211111_101644-Au.webp
    20211111_101644-Au.webp
    133.1 KB · Views: 63
Yes I was there 1 week after a nugget worth $100.000 was found, were you have marked. Someone saw me dowsing over by Antelope creek and showed me the hole. My long story short, I signaled and dowsed a target, and he detected a target. We dug with pick and shovel 2 ft down to Coliche. We didnt find anything! He snapped a pic of the hole, for his deepest dig at a weak metal detector signal confused. I now know what possibly happened then.. Yes, a hammered area!
 
dug with pick and shovel 2 ft down to Coliche.

Caliche can contain placer gold.
 
That was back when I was using 11 inch rods only. I started using 17 inch rods and got away from smalls.
 
Here's another one from 05 in Arizona. I was dowsing with a Gold signal stopping at exits along 17 triangulating. I was able to get 3 lines on it. I only checked with Gold then, after I quickly ruled out Meteorite using Nickel. I didnt check it for Silver, Iron, or Telluride, only Gold. It's probably a Gold vein, could be hidden Gold. It was a 17 inch long rod signal.. It's got quantity.. Do you guys see anything?
 

Attachments

  • 20211127_211347.webp
    20211127_211347.webp
    1.2 MB · Views: 60
Treasure lead
20211127_213401.webp
 
According to coordinates off map, its somewhere near center of this pic.
 

Attachments

  • Screenshot_20211127-223419_Earth.webp
    Screenshot_20211127-223419_Earth.webp
    129.6 KB · Views: 61
Here's another one from 05 in Arizona. I was dowsing with a Gold signal stopping at exits along 17 triangulating. I was able to get 3 lines on it. I only checked with Gold then, after I quickly ruled out Meteorite using Nickel. I didnt check it for Silver, Iron, or Telluride, only Gold. It's probably a Gold vein, could be hidden Gold. It was a 17 inch long rod signal.. It's got quantity.. Do you guys see anything?

Seems to be fines or quartz float/vein slightly west of where your lines cross. East of point lines cross, if any coarse gold look there.
 
According to coordinates off map, its somewhere near center of this pic.
Check above center, moving toward top right corner of map.
 
Looks like a tough area to explore.
 
In case anyone is wondering if anything is at the cross of my triangulation, this next one might help convince you.. I was out Dowsing with a friend, Dec 25 2011. After chasing Meteorite signals for a couple hrs, I switched to Gold mainly. We chased one signal to a lone target, 25 ft. deep. After that I dowsed a long line and wrote down my line direction, and longitude and latitude. It wasn't till a couple weeks later I drew my single line on my map, seeing that it was heading straight to Cherry, and multiple old mines marked on the map. I took the road through the mtns and Cherry and dowsed my final triangulation lines. With all my lines dowsed, I could tell there was only one target signaling back. It took a bit of hiking through a lot of thick bushes, but eventually i made to my Dowsed target. It was Dowsed using Gold for a signal, and i first dowsed it from 8 miles away. Before i post my dowsed triangulation picture. Does anyone want to check what they see? My target is hardrock Gold ore spot. The area N has some mines, only microscopic, or trace Gold is present in area. Jerome is North a little bit. The spot is claimable, and I don't know how much Gold is retrievable out of the total signal. I did some exploratory digging. Went through mineralized Granite and hit a small quartz vein. Didn't have any assay done. It's called a mineralized zone, the light colored Granite saturated with Red, Green, and Black colors leeching out of the vein.
 

Attachments

  • 20211128_135446.webp
    20211128_135446.webp
    58.5 KB · Views: 61
Not much signal at first, but marked something giving hits.
 

Attachments

  • 20211128_135446-ore.webp
    20211128_135446-ore.webp
    63.9 KB · Views: 63
I made Stanton maps in GE Pro.
 

Attachments

  • Stanton_1920x1080HD-GE-map-C2.webp
    Stanton_1920x1080HD-GE-map-C2.webp
    369.1 KB · Views: 77
  • Stanton_1920x1080HD-GE-map-C.webp
    Stanton_1920x1080HD-GE-map-C.webp
    425.4 KB · Views: 64

Users who are viewing this thread

Back
Top Bottom