AT Pro discrimination question

[Hendrix]

I've got an AT Pro discrimination question. The detector will often sound off on VDI that are in a range that is set to be discriminated out. For example, a "50" will sound off even if everything below "60" is set to be discriminated out. Is this normal behavior? If so, why does it do that?

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[Jay In NewKen]

I've never noticed it sounding off in that big of a difference. What i mean is, if i have the first tab in the foil range dis'd out, say 40-45, it will sound off, abet a broken static response, if the vdi hits occasionally between 46-48.

 

[Hendrix]

I could see if it would sound off on borderline signals but it seems to do it over a wide range.

 

[bzbadger]

Mine does it too and wondered if something was wrong till I took the time to watch the screen as I passed over the object and then used iron audio. Some of the trash has different elements in it and it would hit in the area not discriminated but chatters a bit on the notched out. Try it with the iron audio on and you can see. That whole thong in the instructional videos where he puts a nail next to a nickel and you get a combination number seems to be the answer because of what the trash piece is made of.

Sent from my RM-820_nam_att_100 using Tapatalk

 

[bzbadger]

Grrr I meant that whole thing in the instructional video not "thong". Stupid keyboard and big fingers

Sent from my RM-820_nam_att_100 using Tapatalk

 

[Hendrix]

bzbadger, I'm going to give that a try.