AT Pro Wheatie sniffer

neodetectorist

Bronze Member
Jan 4, 2016
1,023
4,118
NE Ohio
🏆 Honorable Mentions:
1
Detector(s) used
Garrett AT Pro W Stock coil, Fisher F2 W 8" Concentric and 9.5" NEL DD, XPointer pin pointer
Primary Interest:
Metal Detecting
No silver yet with the AT Pro but it is a wheatie sniffer.
1939 and 1941 today.
Tons of pull tabs and small relics.
I am amazed at the small targets 6" deep that tone out amazing and blast your ear out.
Still learning the machine though.
Standard all metal with a disc at 30 seems to work well.
I am thinking of upping the disc to 40-50 but I don't want to miss the gold.

0B7766D1-8DF4-41A8-B1E8-E09A60372FF2.jpeg
 

Upvote 5
Congrats on the at pro.
Just be sure to Ground balance about every 15 to 20 minutes or so. Ground mineralization will change. That way you won' miss those somewhat deeper targets.good luck.
 

Congratz on the wheaties, also you will get to know the tone on a silver versus a clad with the pro. Silver is real smooth high tone even when it is deep and it is a whisper (I use pro all metal)
 

Nice job on the Wheats. I dont know anything about the AT Pro, just that I've heard its a good detector. Good luck on finding that silver.
 

Congrats on the wheats. You really need to start using Pro-coin and Pro-zero to get the most out of the AT. You'll cut down on them pull-tabbers:icon_thumright:
 

Top Member Reactions

Users who are viewing this thread

Back
Top