What's new

At the beech

tannerhatley

Jr. Member
Joined
May 20, 2013
Messages
75
Reaction score
16
Golden Thread
0
Location
SE Wisconsin
Detector(s) used
GTI 2500
ACE 350
Primary Interest:
All Treasure Hunting
I went beach shooting over the holiday and found lots of metal. Problem is all the metal I found was not what the 350 was telling me. Every piece I found was dinging at the far end for silver coins. Am I not being discriminative enough, is this rusted metal silver or steel or is the beach being a beech? Sarcasm and suggestions are most welcome.
 
Chances are, it was either lead, aluminum, brass, steel etc. More than likely pieces of a beer can (can slaw). I recommend practicing determining the size of the targets while pin pointing. If you still get a strong read 4-5 inches, left/right/above, center of the coil, it's a larger target.
 
You know better than that! Can slaw, pulltabs and all the sh*%t also shows as good targets and must be dug
or you'll miss the good stuff! Sucks but that's the way it is and has always been! Discriminate to much and
you'll miss the chance at a good target..


I went beach shooting over the holiday and found lots of metal. Problem is all the metal I found was not what the 350 was telling me. Every piece I found was dinging at the far end for silver coins. Am I not being discriminative enough, is this rusted metal silver or steel or is the beach being a beech? Sarcasm and suggestions are most welcome.
 
Chances are, it was either lead, aluminum, brass, steel etc. More than likely pieces of a beer can (can slaw). I recommend practicing determining the size of the targets while pin pointing. If you still get a strong read 4-5 inches, left/right/above, center of the coil, it's a larger target.

Jay is correct - how long have you been at it with your detector? It really takes years to get know your detector and all the signals it is giving you. Patience and time brother!!!!!!:headbang:
 
I would like to guess 10 hrs of actually detecting. I've owned it since May this year.
 
Tann,
Two months isn't enough time bro! Keep at it, you'll start to
get the REAL feel for it. I bought mine May 4th but Ive been doing
this on and off for 10 or more years..
Not saying you aren't doing good, you're doing great! but you'll see what we mean after
a lot more time buddy.
I found this stuff in just two months bro! Yeh some was luck but some is skill
I hope! haha
Cant find the pic of the other gold ring either!
And you know what! Most of this stuff I found at Playgrounds! hahahah
UN believable what people lose!



I would like to guess 10 hrs of actually detecting. I've owned it since May this year.
 

Attachments

  • image (1).webp
    image (1).webp
    46.8 KB · Views: 108
  • image.webp
    image.webp
    40.4 KB · Views: 103
  • ring4x4.webp
    ring4x4.webp
    25.3 KB · Views: 114
  • photo.webp
    photo.webp
    10.7 KB · Views: 177
  • charm.webp
    charm.webp
    16.3 KB · Views: 107
  • Bear.webp
    Bear.webp
    11.8 KB · Views: 100
  • watch1.webp
    watch1.webp
    17.7 KB · Views: 177
Last edited:
I thought I was lacking in the experience department, I just needed to hear it for sure and thanks for the tip on playgrounds and the encouragment. Also very interesting finds. I live around 3 playground parks in a two minute walkind distance. Last time I was there I got stopped and asked all about detecting and where to buy one. I referenced them this site for more info. Thanks guys and any more info is helpful. But one last question: why does steel read a silver coins? Semper Fi
 
Now that's weird. Steel shouldn't show as silver really..
What kind of steel pieces are you talking about.
Hey! sending yo a PM...
Pete


But one last question: why does steel read a silver coins? Semper Fi
 
Ill take pictures tomorrow and post so you can see.
 
Detectors do just that, they detect and determine the conductivity of the metal under the coil or at least a best guess. There are more scientific explanation,but you get the point. Silver is highly conductive so reads high on the meter, while iron is less, gold and nickle fall in the middle.
 
The ace 350 is awful in wet sand/ mineral rich soil...just throwing that out there.
 
Good to know. I have been finding coins but mostly metal chunks and pull tabs and a few nails at the beach. Just more of the metal than anything else.
 
Good to know. I have been finding coins but mostly metal chunks and pull tabs and a few nails at the beach. Just more of the metal than anything else.

Pull tab readings at the beach is a good thing because they read the same as gold. Keep digging them and you just might be surprised. I dig every pull tab hit now.
 
Large pieces of metal will read at the far end of the scale, it overloads the discrimination. A good way to know if something is a big piece of metal is to swing over it again with the coil 10-12 inches off the sand. If you still get a signal, it's a big target, can, iron, steel, etc. A coin or ring will lose the signal at that height above the sand.

Wayne

www.metaldetectingstuff.com
 
That also works great in regular dirt, can save a lot of time digging
 
Last edited:
Here is what I have been finding at Lake Michigan beach that's reading the far right silver.

image-3899748641.webp
 
I know! It's so frustrating but I gotta look.
 
At least on the beach it isn't hard to dig right? Have a magnet in your scoop?
It'll help so this stuff doesn't keep falling through and driving you crazy! LOL



I know! It's so frustrating but I gotta look.
 

Users who are viewing this thread

Back
Top Bottom