crotal bell ( update )

Acejeckel

Sr. Member
Jul 18, 2009
271
598
Just Outside Detroit
Detector(s) used
White's V3I, DFX, M6, Minelab Equinox 800
Primary Interest:
Metal Detecting
I got out for a bit and found this bell can any one tell me anything about it maybe how old ?

Thanks Kris

I cleaned the bell up a little and found a makers mark #2 on the bottom but cant find any info on the #2

The bell looks the be a copper alloy mix with a white metal, date range 17th-18th century.
 

Attachments

  • DSC02191.JPG
    DSC02191.JPG
    42.9 KB · Views: 831
  • DSC02192.JPG
    DSC02192.JPG
    53.4 KB · Views: 767
  • DSC02193.JPG
    DSC02193.JPG
    25.5 KB · Views: 712
  • DSC02194.JPG
    DSC02194.JPG
    32.5 KB · Views: 716
Upvote 0
Re: Found a Bell

Looks like an earlier crotal bell, Kris. Have you tried to clean it up? I've found a few and they sound beautiful. I put mine in a tumbler. Here's an after pic:
 

Attachments

  • 111109c [640x480].jpg
    111109c [640x480].jpg
    38.5 KB · Views: 660
  • 111109c [640x480].jpg
    111109c [640x480].jpg
    38.5 KB · Views: 603
Hi
Weldone on the crotal bell, I found one yesterday, I've had 13 altogether over the years they are
one of my favourite artifacts to find.
Dave.
 

http://riverridgeleather.com/prodimages/Sleigh_bells-1.jpg

Sadly yours is not an older type of Rumbler or Crotal bell but a later Sleigh Bell (same category of bell from a British point of view, but these had a specific use & no loop)- the giveaway is the attachment on the top & the four holes.

http://www.classicbells.com/info/BellComparison.htm
The quote below is from the bottom of the page & its still not quite a match for the attachment type (which maybe be drilled or might be the rivetted, not the right word, but its not a loop see Third photo: for similar & explanation)

'Two bells from the mid 1800s (middle) have four large holes.'

So putting the two pieces of information together, yours is 1850s-1900.
 

CRUSADER said:
http://riverridgeleather.com/prodimages/Sleigh_bells-1.jpg

Sadly yours is not an older type of Rumbler or Crotal bell but a later Sleigh Bell (same category of bell from a British point of view, but these had a specific use & no loop)- the giveaway is the attachment on the top & the four holes.

http://www.classicbells.com/info/BellComparison.htm
The quote below is from the bottom of the page & its still not quite a match for the attachment type (which maybe be drilled or might be the rivetted, not the right word, but its not a loop see Third photo: for similar & explanation)

'Two bells from the mid 1800s (middle) have four large holes.'

So putting the two pieces of information together, yours is 1850s-1900.
Some useful info there.
 

Top Member Reactions

Users who are viewing this thread

Back
Top