juit
Full Member
- Mar 23, 2017
- 116
- 26
- Detector(s) used
-
fisher cz5
Minelab 705
Fisher f5
- Primary Interest:
- Metal Detecting
Guys I know it has been done but no one has post step by step or clear photos or instructions
pole from a electric broom
lower plastic shaft from whites
I used the broom because I need a sleeve that has a 7/8 diameter the shaft is a 3/4 diameter just like the stock diameters of most of the shafts
fully insert the 7/8 shaft inside the crutch
cut and leave 1 1/2 inch out
this is how it looks almost finish
I ordered a Plugger's Replacement Shaft Locks To Fit Minelab Whites Tesoro Teknetics Shafts from ebay its a 7/8 to 3/4 adapter the seller is really helpful & quick answers your questions
Ill post some pics of the final product with the adapter but you get the idea
pole from a electric broom
lower plastic shaft from whites
I used the broom because I need a sleeve that has a 7/8 diameter the shaft is a 3/4 diameter just like the stock diameters of most of the shafts
fully insert the 7/8 shaft inside the crutch
cut and leave 1 1/2 inch out
this is how it looks almost finish
I ordered a Plugger's Replacement Shaft Locks To Fit Minelab Whites Tesoro Teknetics Shafts from ebay its a 7/8 to 3/4 adapter the seller is really helpful & quick answers your questions
Ill post some pics of the final product with the adapter but you get the idea
Amazon Forum Fav 👍
Last edited: