What's new

Deep,Deep, Deep

ron lord

Bronze Member
Joined
Apr 2, 2007
Messages
1,303
Reaction score
1,621
Golden Thread
3
Location
Zephyrhills Fl
🥇 Banner finds
3
Detector(s) used
excel 1000 with 8 inch coil, Garrett AT MAX and a silver U MAX
Primary Interest:
All Treasure Hunting
14 kt. 6.2 grams 24+ inches found with ATX.
 

Attachments

  • IMG_20140928_185615.webp
    IMG_20140928_185615.webp
    2.2 KB · Views: 260
Upvote 0
the ATX is a lot easier to use and with the ATX you will hunt a whole lot slower. it's a lot slow and covers the bottom a lot better.All the control are wright at your thumb tip.IT also has a good dics. Good for tuning out some iron, small wires.
Thanks for the info Ron.
 
What settings?
 
How does one accurately measure the depth of a target detected while shallow water hunting?
Even with a calibrateds shin bone, or scoop handle , couldn't a target be pulled lower as a result of suction created while digging, or just slide lower as you dig?

]
14 kt. 6.2 grams 24+ inches found with ATX.
 
How does one accurately measure the depth of a target detected while shallow water hunting? Even with a calibrateds shin bone, or scoop handle , couldn't a target be pulled lower as a result of suction created while digging, or just slide lower as you dig? ]

You betcha!

Sent from my iPhone using TreasureNet
 
nice deep find ron. i metal detected with you a few years ago at the greyhound track and the next day at naples pier it was fun, good luck ron.
 

Users who are viewing this thread

Back
Top Bottom