What's new

DFX unable to ground balance sand vollyball court

burrito_hut

Greenie
Joined
Apr 24, 2010
Messages
14
Reaction score
0
Golden Thread
0
Location
North Texas
Detector(s) used
Whites DFX
Switched from ACE 250 to DFX and this is the first time I have had this problem. Went to the park and couldn't ground balance in the sand. Was getting +95 signals all over the place. Any ideas? Thanks!
 
it has to do with the base they use under the sand is a layer of clay they use to keep the sand from penetrating the ground and disapearing, it also prevents weed growth. something in that clay sets off the DFX.
what i did was GB off the court and then MD going onto the court to give the auto GB a chance to work.
however, if you get a tone that is more than 5 inches it'll be the clay that's making the tone.
also, anything that registers at +95, ignore it, it's going to be junk
 
Sniffer nailed it. If the DFX acts this way at other parts of the park it may be something else.

Good Luck,
Sandman
 
Thanks for your help guys! Hoping for rain SOON down here in N. Texas. Hasn't rained good for weeks and the ground is now too hard to dig in most places. (not to mention you can't dig a good plug as everything just crumbles!)
 
I wish the ground here crumbled. you almost need a chisel to dig into it
 
Dale, you really need to read everything in the the thread before you post a comment
 

Users who are viewing this thread

Back
Top Bottom