Iron Patch
Platinum Member
- Joined
- Sep 28, 2007
- Messages
- 19,257
- Reaction score
- 8,765
- Golden Thread
- 3
- Location
- Dirtyville
- 🥇 Banner finds
- 3
- Detector(s) used
- Deus
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
Have my SE Pro coil on the way with both upper & lower shafts and will be taking it along with my regular Explorer stock coil to my favorite old area to do some tests. Going to compare Depth, masking, ability on small targets, and a combination of all three. Basically I'm going to find a target with my explorer (which works very welll) with stock coil as I've always done, then mark the spot and switch to the SE pro coil to compare.
So do you think....
1) The old stock EX II 10.5" coil will do better?
2) The new SE 11" Pro Coil?
3) Both will be too close to tell?
My 1050 works so well that I'm going to have to guess #1, but do hope it ends up being #2 or #3 so I can drop some weight off the detector. Should I be right and I do still prefer #1 I can guarantee there will be an SE Pro coil for sale that night with very little use. (like 20 targets)
So do you think....
1) The old stock EX II 10.5" coil will do better?
2) The new SE 11" Pro Coil?
3) Both will be too close to tell?
My 1050 works so well that I'm going to have to guess #1, but do hope it ends up being #2 or #3 so I can drop some weight off the detector. Should I be right and I do still prefer #1 I can guarantee there will be an SE Pro coil for sale that night with very little use. (like 20 targets)