featurless coin

[wolcottdigger]

I found a completely featureless coin yesterday.
I was only out for about an hour and the pain in
the elbow on my swinging arm "right arm" became
so bad I had to stop. Anyone else deal with elbow
pain.

Joe

 

[Swartzie]

Have you tried soaking the coin in olive oil? Works pretty good for me. I also use a brass brush after soaking.

 

[mlayers]

Take a couple of Advil before you go out....Matt

 

[Mackaydon]

Joe:
A friend of mine had that same problem; ended up in surgery. He was advised to slow his swing speed down, especially at each 'turn'. Hasn't bothered him since.

 

[eggbag]

I get those elbow pains quite often mding because of years of jui-jitsu. Sometimes I switch and swing lefty . I'm sure it looks funny because I can tell that its much sloppier and uneven compared to my right. But it keeps me out there swingin' away.

 

[Dual Hunter]

looks to me like a knockout slug from a electrical junction box , i see a million in my job ,we use to be able to fool the older soda machine with these ,they usually come in 7/8 or 1.1/8 diameter for 1/2 or 3/4 pipe but i have seen them up to 2 inch

 

[Gilligan]

Have you tried soaking the coin in olive oil? Works pretty good for me. I also use a brass brush after soaking.

ooooooo , no offense, but the brass brush will neutralize any value of a coin, beware. Just my opinion

 

[spartacus53]

WTG on that coin. You may also want to brace your elbow with an ace bandage, but do not wrap too tight.

 

[magoo30]

Interesting find !!

 

[CRUSADER]

I found a completely featureless coin yesterday.
I was only out for about an hour and the pain in
the elbow on my swinging arm "right arm" became
so bad I had to stop. Anyone else deal with elbow
pain.

Joe

I had to learn how to use the other arm. Switch arms every 2 hours or so... Its helps

 

[allen]

its not my elbow,
but my shoulder
that normally hurts.

 

[Emperor Findus Cladius]

looks to me like a knockout slug from a electrical junction box , i see a million in my job ,we use to be able to fool the older soda machine with these ,they usually come in 7/8 or 1.1/8 diameter for 1/2 or 3/4 pipe but i have seen them up to 2 inch

I was thinking the same thing. No rim and totally smooth, has to be a slug.

 

[diggummup]

What did said coin register or what does it register on your machine? It kinda looks like a slug to me too.

 

[silvercop]