Found a detector......

[JakePhelps]

....In the mail


Got my Cobra Underwater Detector today, also got the Automax Precision V2 Pinpointer.

Couple of Questions

Is it me or the big coil, cause whenever i try to find a target my holes end up the size of dinnerplates

Also what do you get for depth with the pinpointer, by depth i mean how far away from the metal does it beep?

All in all though i think the cobra is a good detector. Tommarow i will try it underwater and see what i can find

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[surfrat96]

Don't know the answer about your detector, but I have the Automax V2. I set it on vibrate mode and it usually picks targets up about 1 1/2 - 2".

Anxious to hear how your new tector works in the water.

HH 8) surfrat

 

[JakePhelps]

Thats what i do too and thats what depth i get too Thanks surfrat 8)

 

[da Hobo]

Jake, good choice on that Automax. ?Depending on how close you set the adjuster knob I find that my Automax will beep at about 1 1/2 inches but that's a push.

The thing I like about that probe is that it will detect at the tip AND up along the shaft a fair distance so on swallow targets I can hold it flat to the ground and many times sweep it over a target and get a beep dead center and retrieve my find with a simple screwdriver or flip of my digger.

Do be warned though and I suspect you have found out already . . . . the shaft is NOT a pry bar!! ?It's fragile and may break if you get too wild with it. ?Also do not forget to turn it off or you will be replacing batteries pretty often. ?Leaving it on is easy to do.

Hobo

 

[vic910]

Take the warning seriously about the V2 not being a pry bar! I just snapped mine in half a couple of weeks ago!!! No wires were broken, so I'm hoping to crazy glue it together and tape it up good.

vicki

 

[PrizmIV]

DUCT TAPE!

 

[JakePhelps]

I am vary carefull with all my gear and stuff. The only digging tool I have ever used is a $1.99 trowel from wal mart lol, i dont think i need a pry bar Is the tip of the pinponter really waterproof

 

[labnewbie]

Hi good luck with the cobra..the water is sooo much fun in the summer.The V@ is not water proof! take it from me lol.If your going to probe underwater the vibra-probe is 100% water proof.


HH newbie

 

[JakePhelps]

I dont really need a pinpointer for underwater, i was just wondering

 

[allen]

let me know if its good underwater. im looking to get something for the river area and lakes around here. keep on digging !!