CGC Miner
Full Member
- Joined
- Nov 18, 2010
- Messages
- 195
- Reaction score
- 346
- Golden Thread
- 0
- Location
- High Rockies
- Detector(s) used
- GB2
- Primary Interest:
- All Treasure Hunting
CRUSHING GOLD! We got our hardrock sampling circuit dialed in with 2 inline rock crushers
that feed directly into the shaker table for gold recovery. Gold ore is fed into the jaw crusher where it is
reduced to 1/2 inch minus and drops onto a conveyor. The conveyor feeds directly into a hammer mill
where the gold is further crushed and ground down to around 50 mesh. The pulverized slurry of crushed
ore is then fed onto a shaker table for gravimetric separation of heavies.
that feed directly into the shaker table for gold recovery. Gold ore is fed into the jaw crusher where it is
reduced to 1/2 inch minus and drops onto a conveyor. The conveyor feeds directly into a hammer mill
where the gold is further crushed and ground down to around 50 mesh. The pulverized slurry of crushed
ore is then fed onto a shaker table for gravimetric separation of heavies.
Upvote
2
I'm sur you know this but before you run good pay in your system water down thee base material under your pad to compact it and let it dry out and then re-check your level. REALLY NICE JOB ! I also hope you've engraved your name or some I.d. of your's onto all that equipment ! Too much $$$ for this equipment to let some low life walk away with it ! Great video!!
