Great gift i recieved Minelab Master Hunting modes SovGT but who made it ??

[Deepdiger60]

I cant find this booklet anywhere even e-bay i have or who made it the mailman delivered it a few days ago from who i don't know , i would like to order a few more as gifts for friends in the detecting team , its great a lot i did not know about the SovGT many different hunting tips and modes i took photo,s of a few pages , if worse comes to worse i can always scan each page all 17 and print them out . Thanks for any information any one has Jim

 

[Keppy]

I never seen a Sovereign manual that looks like that.........

 

[Sandman]

This looks familiar and I might just have read it in the manual or one of Clive's books.
https://www.linkpointcart.net/cgi-b...H230S&cartidnum=71.205.79.13T1324982734R9588E

The Sov GT is one if not the best detectors without a screen. Mine has the Sunray S-1 inline probe. A real plus.

 

[Deepdiger60]

This looks familiar and I might just have read it in the manual or one of Clive's books.
https://www.linkpointcart.net/cgi-b...H230S&cartidnum=71.205.79.13T1324982734R9588E

The Sov GT is one if not the best detectors without a screen. Mine has the Sunray S-1 inline probe. A real plus.

Hi Sandman last year i got Clive,s book it,s almost the same infro. just a little more detail , i have a S-1 probe on the rod to bad the wire that goes to the control box is very short when using the hip mount configuration , the whole purpose of the In Sight is to eliminate some of the wire,s on the rod i have to see if i can extend that wire 1 foot would be prefect to swing a big coil . I have plenty of coil wire i can use i cut the excess wire off most coils you just don't need 60 to 65 inches of wire on a coil and spending 20 minutes winding it around the rod,s each coil change . Jim

 

[Sandman]

This looks familiar and I might just have read it in the manual or one of Clive's books.
https://www.linkpointcart.net/cgi-b...H230S&cartidnum=71.205.79.13T1324982734R9588E

The Sov GT is one if not the best detectors without a screen. Mine has the Sunray S-1 inline probe. A real plus.

Hi Sandman last year i got Clive,s book it,s almost the same infro. just a little more detail , i have a S-1 probe on the rod to bad the wire that goes to the control box is very short when using the hip mount configuration , the whole purpose of the In Sight is to eliminate some of the wire,s on the rod i have to see if i can extend that wire 1 foot would be prefect to swing a big coil . I have plenty of coil wire i can use i cut the excess wire off most coils you just don't need 60 to 65 inches of wire on a coil and spending 20 minutes winding it around the rod,s each coil change . Jim

Hey Jim, Minelab sells two extension cables for the GT so you can set it up anyway you want when using the inline probe. Or maybe I got the extension cable from Sunray, I can't remember.

 

[Jason in Enid]

Looks like something that was made on somebody's home computer and printer. Probably a copy and paste from other sources.

 

[geo4472]

if your still looking for it try this item number on ebay 140715329690 i think its what your looking for