Had the privyledge to check this out today

pynchinflint

Jr. Member
Joined
Dec 31, 2007
Messages
86
Reaction score
3
Golden Thread
0
Location
Bama
Detector(s) used
GTI 2500
Primary Interest:
All Treasure Hunting
Had a friend of mine show me a privy on some of his land. He would like to save this and rebuild around it. It is planted in concrete so before we go and start attacking this project, we'd like to see a picture of one of these before it went into the ground. Is there some sort of flange on the bottom? Anyone have a guess on its age? Any preferred way to get it out of the concrete besides a sledgehammer?

Hope some of you diggers can help out. Looks like we may have a fun dig lined up in the near future!
Thanks in advance.
 

Attachments

  • privy5.webp
    privy5.webp
    188.5 KB · Views: 503
  • privy1.webp
    privy1.webp
    166.6 KB · Views: 494
  • privy2.webp
    privy2.webp
    166.7 KB · Views: 499
  • privy3.webp
    privy3.webp
    171.3 KB · Views: 504
  • privy4.webp
    privy4.webp
    118 KB · Views: 497
  • privy5.webp
    privy5.webp
    188.5 KB · Views: 499
  • privy1.webp
    privy1.webp
    166.6 KB · Views: 501
  • privy2.webp
    privy2.webp
    166.7 KB · Views: 498
  • privy3.webp
    privy3.webp
    171.3 KB · Views: 500
  • privy4.webp
    privy4.webp
    118 KB · Views: 503
I know that they can be moved. I found one similar to that in an old homestead setting but it just didn't look to be in the right place. I probed around it with a 6 foot probe and found no reason to believe there was anything "down below". I did take note that there was cement surrounding it about a foot diameter. I would say before digging, try the probe first just to see if it will be worth it. Now I am not saying that you may not be able to reach any glass or overburden with the six footer, but you should be able to feel a discrepancy in the strata. Goodluck and let us know what ya find! :thumbsup: jgas
 

Great advice jgas. On the what is it thread some have suggested that the lid is from a boiler/furnace or a coal shoot. It looks like this may end up being a fun project.
 

If the base is cast iron going into the cement, to salvage it might be difficult with out taking the cement with it. Using a hammer to break up the cement may break the cast iron.. You might have to take cement and all to get it out of there.
 

They have various sized carbide saw discs these days that will cut throught just about everything. You might try that if you have electrical power nearby - or a generator. That way you can preserve it, as it would look totally cool displayed somewhere. And if this works, you can always use dynamite or hand grenades on whatever remains in the ground. By the way ... What makes this sound? Shissh Boom Baah. Answer: An exploding sheep!

Good luck. I wish I could join you on the digging up the bottles part. But if I did, I'd wait until after the "Boom" part! Lol :tongue3:

SBB
 

Rent a concrete saw from home depot, (they are cheep to rent, and easy to use) and cut around the cast iron base leaving some concrete attached.
How thick is the concrete slab?
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom