List of Garrett AT Pro Target IDs?

[ATGoldGuy]

List of Garrett AT Pro Target ID's?

I swore I saw a list on here of AT Pro Target ID's...but I can't find it. Does anyone have it?

 

Amazon Forum Fav 👍

Cry Of The Eagle: History And Legends Of The Cherokee Indians And Their Buried Treasure - Grab it through Amazon!

[Diggin-N-Dumps]

Hey ATGOLD...I remembered I asked a Question and someone gave me the numbers.....So here ya go!

99 -- Ike Silver Dollar, Morgan Silver Dollar
98 -- Ike Silver Dollar
97 -- Ike Silver Dollar
96 -- Morgan Silver Dollar, Walking Liberty Silver Half Dollar, Franklin Silver Half Dollar, Large Silver Ring
95 --
94 --
93 -- Kennedy 40% Silver Half Dollar
92 -- Clad Dollar, Kennedy 40% Silver Half Dollar, Clad Half Dollar, Aluminum Token, Large Silver Ring
91 -- Barber Half Dollar
90 -- Clad Half Dollar, Clad Quarter, Large US 1 Cent, Silver British Half Crown
89 -- Washington Silver Quarter, Clad Quarter
88 -- Standing Liberty Silver Quarter, Washington Silver Quarter, Clad Quarter, Medium Silver Ring
87 -- SBA Dollar, Clad Quarter
86 -- Clad Quarter
85 -- Barber Quarter, Clad Quarter, Seated Dime, Matron Head Large Cent
84 -- Seated Dime, Matron Head Large Cent, Small Silver Ring
83 -- Mercury Silver Dime, Roosevelt Silver Dime, Clad Dime
82 -- Clad Dime, Small Silver Charm, 1 Yen Coin (JPN), Large 9K Gold Ring
81 -- Seated Dime, 10 Yen Coin (JPN), 1 Yen Coin (JPN)
80 -- Seated Dime, Copper Lincoln 1 Cent, King George Half Penny, 10 Yen Coin (JPN), 1000 Peso Coin (Mexico, 1988), Large Plated Ring, Small Silver Ring
79 -- Seated Dime
78 -- King George Penny, Chuck-E-Cheese Token
77 -- 1 Euro Coin (Ireland), New Zealand $2.00, Australian $1.00
76 -- Seated Liberty Half Dime, Indian Head 1 Cent, Australian $2.00, New Zealand $1.00, King George Half Penny, 5 Yen Coin (JPN), Medium Plated Ring
75 -- Bottle Cap, Spanish 1-Reale, Zinc Lincoln 1 Cent, 5 Yen Coin (JPN) Barber Dime
74 -- Bottle Cap, Rev War British Musket Ball, Copper Lincoln 1 Cent
73 -- Bottle Cap, Small Silver Ring
72 -- Bottle Cap
71 -- Bottle Cap
70 -- Bottle Cap, Civil War Mini-Ball, Medium Charm
69 -- Civil War Mini-Ball
68 -- 22K Gold Sovereign, Civil War Mini-Ball
67 --
66 -- Pop Top, Small Charm
65 --
64 --
63 -- Small Silver Earring
62 -- Nickel
61 -- Indian Head 1 Cent
60 -- Medium 9K Gold Ring
59 --
58 -- 18K Gold
57 -- Large 14K Gold Ring, 18K Gold
56 --
55 -- Mens Titanium Ring
54 -- Small 14K Gold Ring
53 -- Pull Tab, Buffalo Nickel, V Nickel, War Nickel, New Nickel, Small Charm, Medium 13K Gold Ring
52 -- Pull Tab, Buffalo Nickel, V Nickel, War Nickel, New Nickel, Small Charm
51 -- 100 Yen Coin (JPN)
50 -- 3 Cent Piece, 14K Gold Chain, 100 Yen Coin (JPN), 50 Yen Coin (JPN), Small 9K Gold Ring, Platinum Ring
49 -- 3 Cent Piece, 14K Gold Chain, 50 Yen Coin (JPN),
48 -- 14K Gold Chain, 14K Yellow & White Gold Ring, Titanium Ring, Platinum Ring
47 -- Large Junk Earring, Titanium Ring, Platinum Ring
46 -- Titanium Ring, Platinum Ring
45 -- Foil, Titanium Ring, Platinum Ring
44 -- Foil, Platinum Ring
43 -- Foil, Small 10K Gold Ring
42 -- Foil, Small 10K Gold Ring
41 -- Foil
40 -- Foil
39 -- Foil
38 -- Foil
37 -- Foil
36 -- Foil
35 -- Foil, Nail

 

[ATGoldGuy]

Thank you!

 

[Sandman]

This is not bashing of AT Pro. You guys with screens have a lot to learn!!!

For one thing these I'd numbers don't mean squat as you'll get different numbers depending on yet targets orientation to the coil....

 

[ATGoldGuy]

I know that...it is just helpful for my buddy who just bought s used AT Pro to have some idea where things might ring in on his machine. I advised him to run with zero discrimination in Pro Zero and dig everything till he really learns his machine.

 

[Kodiak43351]

I agree sandman I've had Indian head cents come in in the 80s down to high 60s while in the ground. These numbers are a ref but when you are in a trashy area don't even use the screen just listen for a good tone in the trash. Iron and a good target in same spot and those numbers are worthless.

 

[Silver Worm]

So all guys with a screen have a lot to learn? I guess that means all guys without a screen are experts.

 

[ATGoldGuy]

Okay...Thanks everyone for your help!

 

[Diggin-N-Dumps]

This is not bashing of AT Pro. You guys with screens have a lot to learn!!!

For one thing these I'd numbers don't mean squat as you'll get different numbers depending on yet targets orientation to the coil....

oh..here we go again. you seem to chime in on anything to do with an at pro. common sense is numbers vary for every condition. all this is , is a simple guide on how the machine reads targets. i asked the same question when i got my atp..and this was helpful for me..
and i dont always go by the screen. its just a good thing to have for certain areas.
you dont have to start shiii with everyone that wants to learn this machine

 

[Diggin-N-Dumps]

So all guys with a screen have a lot to learn? I guess that means all guys without a screen are experts.

apparenlty they are...we have alot to learn..lol

 

[Kodiak43351]

Best setup for me now is pro zero sens as high as possible iron to 35 and iron audio on. Sure it's noisy but you can hear the targets in the trash. I've tried 0 on iron also but using iron audio on with iron at 35 seems to work better at the site I'm hunting now. If I get out of a trashy area I run wide open with iron auto off and iron at 0. Try this setup out it works in my area. Good luck everyone.

 

[ATGoldGuy]

Thanks I'll give it a try.

 

[metaljunkie]

This is not bashing of AT Pro. You guys with screens have a lot to learn!!!

For one thing these I'd numbers don't mean squat as you'll get different numbers depending on yet targets orientation to the coil....

Target orientation does effect vdi readings, true enough. Just as it can effect sound produced in your headphones! I have found targets less than six inches deep, will normally read accurate. I can tell a quarter, from a penny, looking at the vdi. So to say vdi's mean nothing is not a very helpful or accurate statement. I have dug coins on edge that gave a consistent reading. Maybe a different number, dependant on left or right swing. Yet consistent enough from each swing for me to dig. Found a loonie once this way. Yeah, it was on it's edge.
Don't get me wrong, vdi is not the only info. But when paired with sound, it will tell you more information. So why not use it…..

 

[RobRieman]

I agree. It's definitely more accurate than not. I can tell what I'm going to dig at least 75% of the time by the VDI. Coins closer to 90%. And what I mean by "can tell what I'm going to dig" I mean the composition of the metal.

 

[DiggerinVA]

I run my ATP in pro zero no iron disc.....if i am at an old home site or a civil war site....i dig a ALL mid and high tones that are repeatable and only check vdi for reference. But Vdi readout is much more useful at newer sites with foil and tabs. I know that i could be missing a gold ring but i have the option to dig or not with my readout.....and personally i am more looking for coins and relics.

 

[Potts]

The only way your going to learn is to dig and learn what your defector is telling you.

 

[Kodiak43351]

The only way your going to learn is to dig and learn what your defector is telling you.

great advice

 

[Bart@Big Boys Hobbies]

Audio Audio Audio....

 

[cooper1841]

The same number, and tone, can be something totally different next hole...................I love suprises!!

The only way your going to learn is to dig and learn what your defector is telling you.

 

[JMac48]

Thanks, this alone has helped so much.