What's new

Looking to fix something that isn't broken!

the_mad_cladder

Hero Member
Joined
Jan 2, 2015
Messages
848
Reaction score
2,381
Golden Thread
0
Location
North Carolina
Detector(s) used
XP Deus with all the coils, MI-6 pinpointer, Ace350 and Garrett pro pointer.
Primary Interest:
Metal Detecting
IMG_0039.webpI don't have enough time to detect and I do get skunked but the deus has helped me find 20 silvers since February. I've been using 2 programs from the sabisch book and need advice. I primarily use the "high performance" and "trashy" programs and was wondering if there are any changes that should be made for 4.0 (or just in general) that anyone recommends.
 

Attachments

  • IMG_0031.webp
    IMG_0031.webp
    1.1 MB · Views: 103
dang look at that silver :weee:
 
Congratulations on the silver! :occasion14:
 
Id change GB to "tracking" its so much better in 4.0
 
Id change GB to "tracking" its so much better in 4.0

Thanks for the tip. That's definitely a plus since I always forget to check it.
 
that's the program that I have used since the start of using the Deus. It's a beast and I find that I have to control it. it can be way too chatty or sensitive. I do use full tones tho. I sometimes have to lower sens to 86 or so... if it's still too chatty I lower the TX to 2, and sometimes raise the reactivity to 2 or even 2.5 and raise the silencer to 1. There aren't many places where I can run wide open like that. I thought that making those changes that I was losing depth but I am surprised how deep I still get and if things are chatty you're not going to hear those faint tones anyway.
 
I notice a lot of people use a Tx=3 and sensitivity=92+. I have never used Tx=3 and rarely run my sensitivity higher than 90. I think it calms the machine down more but still has great performance. I also recommend running full tones zero disc. This gives you the complete snapshot of whats going on in the ground.
 

Users who are viewing this thread

Back
Top Bottom