ivan salis
Platinum Member
- Joined
- Feb 5, 2007
- Messages
- 16,836
- Reaction score
- 3,817
- Golden Thread
- 0
- Location
- callahan,fl
- Detector(s) used
- delta 4000 / ace 250 - used BH and many others too
well was showing a freind of mine "david" how to metal detect and hit a gold signal ---- knowing that david has never found silver muchless gold -- I called him over and tell him here dig this signal --- he takes the ace 250 locates the spot cuts a good sized plug & lays it to the side close by the hole --- then he waves the ace250 over the hole it rings up --- so its deeper down he thinks, so he dig's more --- I hand him the V4 pin pointer for him to check the hole nothing in the hole --- so he brings over the detector again checking yep still getting a signal ---so more digging --again nothing with the pin pointer -- finally about 12 in down --- he looks at me and says ok boss where is it ? --- I said did you check the plug you pulled? --- I pull the plug away form the hole and have him check the hole nada -- then the plug ---bingo !!! after breaking up the plug -- out it pops!! ---( lessons learned ? -- keep the plug away from the original hole and always check the plug first)--- it was my new ace 250 's first gold and david's too --- a child sized gold kiddie ring --(just will fit on the tip of my pinkie) its thin as can be too **** however it is marked 625 mexico -- so thats 14k (actually 625 would equal 15 k gold )---not much of it however , but hey you gotta take what comes --- I'm going to give it to david to use as a real gold "tuner- adjustment checker" piece --- Ivan
Upvote
0

--- I gave it to david "as his first gold" and as a "christmas present" to fine tune his machine with*** if your machines tuned to pick this up trust me your not passing up any "worth while" gold --- Ivan








