Silver Dollar lot again.

foreverRich

Full Member
Mar 31, 2009
195
886
Portsmouth, VA
Detector(s) used
Teknetics Gamma 6000
,GTA1000, Discovery3300
Primary Interest:
All Treasure Hunting
Went back to my favorite hunting spot. Weather was perfect for hunting. I am learning to swing my detector and use the pin pointer while sitting beside the hole. There are still plenty of targets in concentrated areas.

Things are slowing down, but still way better than some of my previous hunting spots. Did manage two more Kennedy Half Dollars. Also got two Buffalo Nickels (one with a readable date of 1936) and a wheat penny. Plan on going back till it stops giving me good targets (even if it kills me). Here are my today's finds.

Till next time, Happy Hunting !!!
 

Attachments

  • 10252016 Hunt.jpg
    10252016 Hunt.jpg
    68.6 KB · Views: 139
  • 10252016 Kennedy Halves.jpg
    10252016 Kennedy Halves.jpg
    50.9 KB · Views: 113
  • 10252016 Buffalo Nickles.jpg
    10252016 Buffalo Nickles.jpg
    47.9 KB · Views: 112
  • 10252016 Wheat Penny.jpg
    10252016 Wheat Penny.jpg
    40.9 KB · Views: 110
Upvote 14
Nice work, keep it up! :occasion14:
 

Congrats on some more nice finds, no telling what might show up after you get some more of those signals out of the way. Good luck
 

Good job, nice finds.
 

I am trying to determine how big your area is......you are digging targets your detector finds. And once you start digging you are finding multiple targets in the hole with your pin pointer. Once you get rid of the big targets you should find some gold. Those people were rich!!
 

I am trying to determine how big your area is......you are digging targets your detector finds. And once you start digging you are finding multiple targets in the hole with your pin pointer. Once you get rid of the big targets you should find some gold. Those people were rich!!

The area is the size of an average city lot (minus house). I got all the surface finds weeks ago. I located an area about 10' X 10' now and dig a hole. I put the dirt to the side and scan it with the detector to recover targets, then scan the hole with my pin pointer to find anything else. Usually I search two holes each hunt. I have done quite well so far.:icon_thumleft:
 

Top Member Reactions

Users who are viewing this thread

Back
Top