goldhat
Full Member
- Aug 14, 2009
- 211
- 548
- Detector(s) used
-
XP Deus II
Tesoro Lobo SuperTraq
Fisher F-Pulse Pinpointer
- Primary Interest:
- All Treasure Hunting
A few things I want to talk about with this pinpointer. The good, the bad and the ugly.
The good. Itās very sensitive. It will pinpoint very deep targets.
The bad, it seems like about 20% of the time I put the pinpointer on it changes setting. Then I have to sit there and fumble with the thing to find the correct setting again. Sometimes it can be difficult find it.
The ugly. This is a $157 pinpointer. If you shake the pinpointer it rattles inside. It just seems like poor quality. I donāt believe I should be having these types of issues for the money. I was in the field today and somehow the settings got changed. It was extremely frustrating since it took 15 minutes away from my hunt and I couldnāt get the pointer back to the correct setting I needed to pinpoint. Iām new to this pinpointer. Iām sure some of it is user error but not all of it is on me. It got so bad I quit my hunting early because if I didnāt that Fisher would have been in pieces.
Anyway, Iām going to reserve judgment for the time being since Iām new working with it. The big problem for me with this pinpointer is the on, off button is the same button you press to change setting. If the setting accidentally gets changed itās a bitch to get them back out in the field especially when itās already in the mid 90ās and the sun is beating down on ya and youāre hot already š„µ Last thing you need is bullshit from your pinpointer.
Time will tell with this pinpointer.
The good. Itās very sensitive. It will pinpoint very deep targets.
The bad, it seems like about 20% of the time I put the pinpointer on it changes setting. Then I have to sit there and fumble with the thing to find the correct setting again. Sometimes it can be difficult find it.
The ugly. This is a $157 pinpointer. If you shake the pinpointer it rattles inside. It just seems like poor quality. I donāt believe I should be having these types of issues for the money. I was in the field today and somehow the settings got changed. It was extremely frustrating since it took 15 minutes away from my hunt and I couldnāt get the pointer back to the correct setting I needed to pinpoint. Iām new to this pinpointer. Iām sure some of it is user error but not all of it is on me. It got so bad I quit my hunting early because if I didnāt that Fisher would have been in pieces.
Anyway, Iām going to reserve judgment for the time being since Iām new working with it. The big problem for me with this pinpointer is the on, off button is the same button you press to change setting. If the setting accidentally gets changed itās a bitch to get them back out in the field especially when itās already in the mid 90ās and the sun is beating down on ya and youāre hot already š„µ Last thing you need is bullshit from your pinpointer.
Time will tell with this pinpointer.
Amazon Forum Fav š
Last edited: