Two !!! Pewter USA buttons !!

VERMONTPACKRAT

Bronze Member
Aug 6, 2007
2,243
391
Topsham, Vermont
Detector(s) used
Minelab 705, Garrett ace 250
Today I took some time for myself and headed to a far corner of the hay field accross the road. This spot in the field was my first serious hunt this spring with the ACE 250. I brought home a 1798 LC, a handfull of tombac and dandy buttons. This is the first time back to this spot since that weekend.
Now I swing a Minelab 705 and was thinking that I could pick up something old. I turned off the iron, cranked up the sens. and picked my way arround.
Not really sure what to say other than the best button came first at about 10". I knew right away that I had a KEEPER ;D In my watch pocket it went....... About twenty feet away got another broken deep signal....... USA # 2 !!!!!

I spent another hour and got a small cuff size tonbac then called it a day.

I will be going back.......

VPR

 

Attachments

  • IMG_8504_1_1.JPG
    IMG_8504_1_1.JPG
    57.2 KB · Views: 2,666
  • IMG_8507_1_1.JPG
    IMG_8507_1_1.JPG
    58.6 KB · Views: 2,661
  • IMG_8513_1_1.JPG
    IMG_8513_1_1.JPG
    77.5 KB · Views: 2,686
  • IMG_8515_1_1.JPG
    IMG_8515_1_1.JPG
    70 KB · Views: 2,647
  • IMG_8518_1_1.JPG
    IMG_8518_1_1.JPG
    80.4 KB · Views: 2,610
  • IMG_8521_1_1.JPG
    IMG_8521_1_1.JPG
    68.5 KB · Views: 2,601
Upvote 2
bet those got your blood warmed up. a usa button is very high on my wishlist, but two in a day?
goodness, my banner vote is in. dwayne
 

Now that is one smokin USA pewter!!! :P

If that doesn't make the banner I will be bumping to the top of the posts forever in protest! ;D
 

Banner Buttons :icon_king:

They are in great condition :icon_thumright:
 

Must be more in that area, go get the rest :icon_thumright:
 

CRUSADER said:
Must be more in that area, go get the rest :icon_thumright:


Yep, I would hunt that place very hard. My better spots had about a dozen Rev pewters... maybe the button finding is just getting started! :thumbsup:
 

I feel I just got pushed off the Banner. Very justified.
My vote is in. Banner all the way!
Newt
 

Thank You for all the replies !!
I am still a little shocked at this... I have been outside doing yard work so I dont sit here and stare at the button's.
What do I do now? I am not going to do anything more to clean them. These are going to be left "as found" .
Is there a place where I can get some more info about this button. Do any of you fine folks have anything to add about the story behind this find. Should I do anything to conserve these buttons?

Thanks again, VPR

 

Attachments

  • IMG_8524_1_1.JPG
    IMG_8524_1_1.JPG
    66.9 KB · Views: 2,380
  • IMG_8525_1_1.JPG
    IMG_8525_1_1.JPG
    55 KB · Views: 2,342
  • IMG_8526_1_1.JPG
    IMG_8526_1_1.JPG
    66.6 KB · Views: 2,362
  • IMG_8527_1_1.JPG
    IMG_8527_1_1.JPG
    65.8 KB · Views: 2,364
VERMONTPACKRAT said:
Thank You for all the replies !!
I am still a little shocked at this... I have been outside doing yard work so I dont sit here and stare at the button's.
What do I do now? I am not going to do anything more to clean them. These are going to be left "as found" .
Is there a place where I can get some more info about this button. Do any of you fine folks have anything to add about the story behind this find. Should I do anything to conserve these buttons?

Thanks again, VPR



Yes, you absolutely have to seal those. There are a few options with clear urethane and a wipe being my method of choice. Wax I don't like on pewter because you can't heat, and I have never tried the glue mixture method. Do a little research and testing and see what you prefer.

Here's one I just recently posted that is sealed. The idea is to protect it, but not leave it too glossy... as a dug pewter really shouldn't be.

PS... A little soap and water with some light brushing wouldn't hurt either if you haven't done that. Better to get as much dirt off as you can before you seal them.
 

Attachments

  • 84th_button.jpg
    84th_button.jpg
    55.6 KB · Views: 2,383
  • 84th_button.jpg
    84th_button.jpg
    55.6 KB · Views: 2,358
I can't recall ever seeing two USA pewters being found in a single hunt, very well done. I'd be working every signal there is, and work the iron too!. Definitely a banner find.

James.
HomesteadHunter.
 

Are there different sizes/varieties of this button?

What I have been able to find online tells me that I have a really nice button.

Would a light spray from an aerosol can of satin poly work?

VPR
 

Awesome finds! Banner! :thumbsup: I'd go that area with a fine toothed comb. Who knows what else is waiting.
 

Top Member Reactions

Users who are viewing this thread

Back
Top