What's new

WAM or CAM????

moff347

Full Member
Joined
Apr 8, 2013
Messages
197
Reaction score
100
Golden Thread
0
Primary Interest:
Other
I don't want to reveal the date of this coin but do yall think this is a WAM or a CAM



ForumRunner_20131029_223402.webp



IMG_20131029_223113.webp
 
Upvote 0
I'm gonna guess CAM, but I'm no expert.
 
I am 100% sure. If it's a 1992 p or d, which I'm going to assume that is why you didn't reveal the date, epic find and a huge congratulations to you! I would understand why you didn't reveal the date was because you didn't want any bias.
 
It's a Close A and M.

It is NOT a wide A and M.

That is my opinion.
 
CAM absolutely. I'm betting he has the 92-D being from Texas. Fingers crossed.
 
CAM absolutely. I'm betting he has the 92-D being from Texas. Fingers crossed.

I'm guessing the same thing. D mint I'll take a stab and say that due to the severe spotting it'll fetch around $800. If it's Philadelphia I'd guess $2,500, since so few have been found.
 
Well i feel kinda embarrassed. After posting this thread i remembered that you could check the FG mark to tell if it is a CAM or WAM. Well it is a CAM, but unfortunately it is not a 1992. It is actually a 1997. I had not run across a CAM that had quite that much of a gap between the A and M so i thought i might have found the rare 1997 WAM. Unfortunately that was not the case. Thanks for the posts. Hopefully the next time i post a thread like this it will be for a legit 1997 or a 1992.
 
Well i feel kinda embarrassed. After posting this thread i remembered that you could check the FG mark to tell if it is a CAM or WAM. Well it is a CAM, but unfortunately it is not a 1992. It is actually a 1997. I had not run across a CAM that had quite that much of a gap between the A and M so i thought i might have found the rare 1997 WAM. Unfortunately that was not the case. Thanks for the posts. Hopefully the next time i post a thread like this it will be for a legit 1997 or a 1992.

That's ok! You didn't want bias which is good!
 
Don't be embarrassed. The CAM can be touching or nearly touching, the WAM will be centered.
 

Users who are viewing this thread

Back
Top Bottom