Activity seems sparse in the Wyoming forum LOL.

Another site in Carbon Co. is the ruins of Fort Fred Steele. It is near the almost deserted town of Walcott. The fort was established in 1868 to afford protection for travelers on the Overland route. The post was abandoned in 1886. Only a few weatherbeaten log frame buildings may remain.
 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!
Another site in Carbon Co. is the site of Fort Halleck. It is on a private ranch near Elk Mountain. Established in 1862, the fort was also a strategic post and station on the Overland Stage route.
 

WYMEDIC

Copper mt v146.805 dup-100Hz do you need a tone to get in? vhf/uhf instaled today, I either cant hit it, or the wrong tones are set. I did chat with a ham in thermop, I was 5x5:thumbsup:

To keep it TH related I realy think I like my 6" coil better than the 9" on my 705
 

ImageUploadedByTapatalk1364597859.925981.jpg. It's a jeep thing
 

There ya go!!

It is a 100hz tone I believe.

And they are going to soon have a link into the system from Thermop. Should be an easy hit for you from Worland.
 

Hey guys,
Add one more in Wyoming to the list. Apparently Sott and I hit a few of the same forums and he invited me over here. I am in southern Campbell county where we lease a small place and run a few cows. I'm also a welder in the oilpatch.

We bought a Whites MXT last fall so I have'nt had a chance to use it or learn it yet. We are both newbies. I do have access to a few spots to hunt as I am friends with quite a few other ranchers around here and alot of places have old abandoned homesteads. As a matter of fact, the place we are on has a really cool history. Each year they used to send out about 5000 hd of cattle, 2000 hd of horses and 10,000 hd of sheep from our corrals headed for back east. Right where our house sits used to be an old stage stop too. I am very interested in Wyoming history and would like to get out and do some hunting in other parts of the state.

Looking forward to visiting with all of you.

Tex
 

Hey Tex, glad ya made it over. HAHA left ya a long msg on kev's site. I guess I should have checked here first. Welcome!

I'm sure sometime this summer you may have to host a hunt, sounds like a good place you are sitting on.

Scott
 

Ya, welcome to the site.

There aren't a lot of us, but a it seems that a few detectorists exist here.

I was actually hitting a Casper park yesterday, and some dude walked over with his detector and started a conversation. Sounds like he hits the parts fairly regularly. I chuckled a little as he told me that he pounded out the park I was in. Not even 10 seconds before he walked up, I pulled a quarter and dime out of the ground LOL.

Anyway, I think some things will get organized this summer for anybody to attend if they want. It is SOOOOOOOOOO very close to being acceptable weather. I hit Alcova for 8 hours yesterday. Beautiful with just a little ice on the water. I found a bunch of clad and MILLIONS of pulltabs, but nothing if interest.

WM
 

I saw where some of you are into ham. One of my goals for this year is to get my ticket. A friend of mine is into it and because of interest on another forum he started Prepared Ham I t is a pretty cool site geared towards prepping and helping newcomers get their feet wet.

Apparently Scott and I hit several of the same forums which doesnt really surprise me as most folks in Wyoming have alot of the same views on things. I'm really looking forward to meeting up with you guys. Do any of yall do much shooting or hunting?

Tex
 

Yup, Wyoming is a small world. I have lived here my whole life, and it seems I run into the same circle of people quite often.

I used to hunt a lot, but with the price of fuel/license/travel/processing/storage, I have all but given up on it. Too bad of a back to pack elk out anymore.

I still do shoot quite a bit. It has tapered off with the ammo shortage in my favorite calibers, but I still frequent the range. I used to competitively shoot in IDPA and IPSC 3 gun.

WM
 

NICE!!!

If only the snow in Casper would stop LOL
 

Wyomingmedic said:
Yup, Wyoming is a small world. I have lived here my whole life, and it seems I run into the same circle of people quite often.

I used to hunt a lot, but with the price of fuel/license/travel/processing/storage, I have all but given up on it. Too bad of a back to pack elk out anymore.

I still do shoot quite a bit. It has tapered off with the ammo shortage in my favorite calibers, but I still frequent the range. I used to competitively shoot in IDPA and IPSC 3 gun.

WM
Click to expand...

I hear ya on the bad back. In 09 I was building a powerplant here and I fell breaking my back. It has been a long recovery and Im still not as good as I was. At 40 years old I'm sure age has a little to do with it. It has really affected the amount of time I get to spend horseback and starting colts as well.

Tex
 

tally for today Three dollars, eleven and half cents.

18kt ring electroplate I was pretty excited when I uncovered it, then I saw it was junk, but I thought I would share the excitement for a bit.

ton of pull tabs

I hit 2 parks

Scott
 

Last edited:
Hey Tex, ya need to tell the $500 dollar bill story, sounds like something I'd do...HAHAHA

Scott
 

So I had an idea sitting here this morning sipping my joe.

Copper would make a good soft probe, but, you say it will bend!

I also flintknap, I make a copper flaking tool, now the trick is to make the copper wire not bend. here is the trick.

Get a 2 foot length of ground wire, just like whats on the side of your house, chuck one end into your drill, put the other end into a vise and spin. The spinning "work hardens" the copper and makes it stronger. I have a piece in the garage and when I finish the coffee I'm going to give it a try, I think for a 2 or 3" probe it may work out, I'll let ya know.

Scott
 

ImageUploadedByTapatalk1364738800.363069.jpg

Here is what I came up with in the last half hour
 

You must log in or register to reply here.

Anybody out there?

⬅️ Previous Thread

Why wyoming book

Next Thread ➡️

Top Member Reactions

Users who are viewing this thread

Total: 5 (members: 0, guests: 5)
Simplex Metal Detector

Latest Discussions

Back
Top