Has Anyone Never Liked Their New MD

[Oddjob]

Seems to be a fair amount of issues with the new Minelab judging from all the complaints on here; but really have not seen any technical complaints yet.

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[bowwinkles]

Originally my detector was pretty crude and very heavy but was still a ton of enjoyment. As time went by I went with the hype and have had a few of the favorites, which I seemed to learn and enjoy them also. The one and only machine that has fallen into the realm of being a dud is the Garrett ace 400 which no matter the amount of time I spend it still falls short of becoming anywhere close to functioning up to the level of its competition. I gave it away once and it was returned because it would just not work in the type of soil the person was trying to use it in.

 

[Peter67]

Bought and sold a lot of detectors over the years and none of them were really bad except the Garrett Ace 250. Bought this one with the normal and big coil but only used it for 2 months. Nose heavy, bad discrimination, bad separation and slow recovery. I don't understand why this is/was such a popular detector.

 

[nwpa]

I started out with an old Sears yellow machine back in the 70's and worked my way up with many brands and fell in love with the Teknetics T2 it's just so simple to operate and keeps on going.
I went through a couple newer advanced machines but just too much to adjust and fidget around with.
Most finds are at most 8-10" deep so no real need for something deeper.

 

[smokeythecat]

Oddjob, you are right. It's going to be comparable to some of the other mid range detectors out there, but I doubt it will walk on water. We would have seen that by now. Around here depth isn't as important as just being at the right place at the right time.

 

[BigWaveDave]

One good thing, no matter what you use, there will always be a market for good, used machines, no matter what kind they are.

I beg to differ, unless you are interested in a gently used Quest Pro.

 

[smokeythecat]

That's "good, used". I never had any issues selling an unwanted detector, even very low end ones.

 

[Tedyoh]

E-trac, hated it for relic hunting iron ridden sites....sooooo sloooow....i could not sell it quick enough....

 

[DeepseekerADS]

My first was the Garrett Master Hunter Deepseeker ADSIII

Then I got a Fisher 1260X.

I was successful and loved both of those machines.

Then I switched to a Whites 6000 D(i ?) - a motion machine = cranked my elbow and shoulder pretty quickly.

I quit for 30 years after that. I'm a new guy again.

 

[sprailroad]

Cobra "Beach Magnet", gave that one away.

 

[TwistedT]

I have a Fisher F5 that me and it just dont get along too well. lol
I have used it multiple times and it works fine - but something about me and it just dont click

 

[IMAUDIGGER]

Never heard of someone having 4 top of the line detectors and not being happy as can be.
Maybe some day they will come out with a special hand holding mode.

Just kidding. Sounds like need to just spend more hours learning the new stuff.

 

[Oddjob]

Never heard of someone having 4 top of the line detectors and not being happy as can be.
Maybe some day they will come out with a special hand holding mode.

Just kidding. Sounds like need to just spend more hours learning the new stuff.

Who?

 

[Oddjob]

Not sure what your on about.

 

[IMAUDIGGER]

Well never mind then.
Good luck digging up some treasure.

 

[Oddjob]

Well never mind then.
Good luck digging up some treasure.

No worries then, and good luck with your comprehension, I am sure if you put in enough time learning to read you will one day grasp it.

 

[chub]

No worries then, and good luck with your comprehension, I am sure if you put in enough time learning to read you will one day grasp it.

Boom. Careful, people have been given time out for this type of response....

Personally, I think this is an interesting thread. I let go of a Fisher F5 - just not deep. Also had a whites classic SL.... also just not deep and lots of falsing.

Chub

 

[dirtdigginfool]

Basically tried my best to wear my ATP down to a nub...several small repairs (arm cuff and control assy. falling off)...finally the headphones were starting to go south about the same time Garrett was telling me that the AT Max was going to be my savior. So I ordered one up..and....how do I say this? For starters, it is not even close to the ATP...operational-wise..But please know i am trying my best to give it a try. Tones are different and vdi numbers are different. When does a clad dime bounce from 78-90 on an ATP? NEVER....It did find me a nice silver ring Friday, but everything I've dug so far I could've found with the Pro. I do like the depth the Max offers in All Metal mode. I'm not giving up on this thing, something tells me I just haven't got the hang of all the extra bells and whistles. If any other Max users want to reply, offer tips or simply talk detecting, please do so. Thx for listening, Ddf.

 

[Oddjob]

Basically tried my best to wear my ATP down to a nub...several small repairs (arm cuff and control assy. falling off)...finally the headphones were starting to go south about the same time Garrett was telling me that the AT Max was going to be my savior. So I ordered one up..and....how do I say this? For starters, it is not even close to the ATP...operational-wise..But please know i am trying my best to give it a try. Tones are different and vdi numbers are different. When does a clad dime bounce from 78-90 on an ATP? NEVER....It did find me a nice silver ring Friday, but everything I've dug so far I could've found with the Pro. I do like the depth the Max offers in All Metal mode. I'm not giving up on this thing, something tells me I just haven't got the hang of all the extra bells and whistles. If any other Max users want to reply, offer tips or simply talk detecting, please do so. Thx for listening, Ddf.

Thats all it takes, just a little time and then your running fluently. Sometimes getting there is a learning curve, even when it is from the same line from the same brand.

 

[dirtdigginfool]

Thats all it takes, just a little time and then your running fluently. Sometimes getting there is a learning curve, even when it is from the same line from the same brand.

Thx Oddjob, I have faith in Garrett and their machinery, I just thought there would be less of a learning curve...but it looks like there's more to it than the backlight, threshold, etc..thx again for the inspirational wisdom! Ddf.