Jamie1993
Hero Member
- Joined
- Feb 12, 2016
- Messages
- 511
- Reaction score
- 1,173
- Golden Thread
- 0
- Detector(s) used
- Garrett AT Pro, Garrett AT MAX
- Primary Interest:
- All Treasure Hunting
I got out of work early today, so I decided to take a couple hour walk in an old city park with the AT Pro set at pro zero with the ground balance set at -10 from initial ground balance..
The first find of the day was a 1886 IHP.
The second find of the day was a flat button at about 10" deep.

The final find of the day was found about 9" deep masked by a piece of can slaw. I was getting a VDI number of 39-45 with a little chirp of 70. I found the slaw first then I re-scanned the bottom of the hole and this what came out of the hole.

I was wondering if anyone can help with identification of the hallmarks? I did have the ring tested and it is 22 kt, it's the first time I have found a ring of this carat. Any help would be greatly appreciated.
Keep your coil low and slow.
The first find of the day was a 1886 IHP.
The second find of the day was a flat button at about 10" deep.

The final find of the day was found about 9" deep masked by a piece of can slaw. I was getting a VDI number of 39-45 with a little chirp of 70. I found the slaw first then I re-scanned the bottom of the hole and this what came out of the hole.

I was wondering if anyone can help with identification of the hallmarks? I did have the ring tested and it is 22 kt, it's the first time I have found a ring of this carat. Any help would be greatly appreciated.
Keep your coil low and slow.
Upvote
46








