One Dowsed observation

[dowser]

I made these wire mesh wrist sleeves, and they definitely help when signal gets week..

For anyone that needs signal Enhancement, I highly recommend a piece of this on your wrist while Dowsing.. It only need to be 5 inches, not taped, and only need to observe one rod, but I like both myself.
Maybe it will work for you, maybe not..
It might help enhance map Dowsing..

 

[dowser]

With all the enhancement devices I can come up with, I still deal with interference, and Element signal chasing becomes difficult.
I have found one way to observe a Dowsing anomaly, using L-rods.
As I have posted, Styrofoam, blocks and directs quantum frequency resonation. Frequencies don't travel thru, they flow down around the perimeter, into the drain.
It is easily Dowsed and observed, that the Perimeter field around the Styrofoam is indicated by the rods, because of increase in downward flow of Frequencies above the Styrofoam are all directed to the sides.
Just Dowse Piece of 2 inch Styrofoam, nothing more, and watch the rods indicate the perimeter.
Yes, Microwave oven will shut any Dowsing observations down.

 

[dowser]

I see a video where a human has this Plantwave work, just as well as plants.
I Will eventually get one, and try for hearing the Dowsing signals/Frequencies as I stand in, or cross thru them.
I bet it's the same signal through the hands.
There might be a difference in sound between frequencies, namely Master key, compared to Elements frequency, or solid to manufactured.

 

[Kel1]

With all the enhancement devices I can come up with, I still deal with interference, and Element signal chasing becomes difficult.
I have found one way to observe a Dowsing anomaly, using L-rods.
As I have posted, Styrofoam, blocks and directs quantum frequency resonation. Frequencies don't travel thru, they flow down around the perimeter, into the drain.
It is easily Dowsed and observed, that the Perimeter field around the Styrofoam is indicated by the rods, because of increase in downward flow of Frequencies above the Styrofoam are all directed to the sides.
Just Dowse Piece of 2 inch Styrofoam, nothing more, and watch the rods indicate the perimeter.
Yes, Microwave oven will shut any Dowsing observations down.

I'm hoping to help 2 people out with there lost rings. One is an engagement ring lost about a year ago and the other a class ring that got thrown in a ditch many years ago. What would you suggest as a good way to look for those signals?

 

[dowser]

I'm hoping to help 2 people out with there lost rings. One is an engagement ring lost about a year ago and the other a class ring that got thrown in a ditch many years ago. What would you suggest as a good way to look for those signals?

Rings are a small target for Dowsing, and we need to be close enough to signal them.
Dowsing doesn't replace Metal detectors!!
It does for me.., because I no longer have a detector.

But if you know how to Dowse, and want to try looking, I suggest sensitive rods, with maximum enhancement, from a frequency generator or frequency enhancement Stones, which you probably have neither. Good luck!

 

[Kel1]

Rings are a small target for Dowsing, and we need to be close enough to signal them.
Dowsing doesn't replace Metal detectors!!
It does for me.., because I no longer have a detector.

But if you know how to Dowse, and want to try looking, I suggest sensitive rods, with maximum enhancement, from a frequency generator or frequency enhancement Stones, which you probably have neither. Good luck!

I have frequency generators but not sure what type it takes. Do you set it at a certain frequency then?

 

[dowser]

I have frequency generators but not sure what type it takes. Do you set it at a certain frequency then?

Most any Frequency generators work, using Sine wave. Phone apps don't generate resonated Frequencies.
Plug your generator in, laying on the floor with room to Dowse around it.
Set at 13.5 khz, Sine, max Amplitude, then Dowse around it checking for signal lines connected to it.
If you don't get any signals, give it time, keep checking. A microwave might be on near by.
If you still don't get any connection lines to the generator, you need to change your Dowsing rods.
13.5 is a universal frequency, a Master key, not an Element specific frequency. Learn with that..

 

[dowser]

Most any Frequency generators work, using Sine wave. Phone apps don't generate resonated Frequencies.
Plug your generator in, laying on the floor with room to Dowse around it.
Set at 13.5 khz, Sine, max Amplitude, then Dowse around it checking for signal lines connected to it.
If you don't get any signals, give it time, keep checking. A microwave might be on near by.
If you still don't get any connection lines to the generator, you need to change your Dowsing rods.
13.5 is a universal frequency, a Master key, not an Element specific frequency. Learn with that..

If you have another generator, run that at 8.7 khz, then Dowse for connection line between the 2 generators.
That gives double enhancement in the created Dowsing field.
Multiple within reach connection lines will be pulled into both..

 

[dowser]

My Dowsing Instructions kit.
Elements to Electronics, and their enhancements..

 

[Prairie Gazingfox]

Anything above the foam doesn't help. The bad signals travel horizontal, in everything except foam so far.. If concrete or wood flooring is above the foam, it's irrelevant. No blockage!

I can kind of relate to the Styrofoam buffer zone properties. To me it comes down Not to whether the Styrofoam or gravity exhibit waves, but because it is so light, low density and almost no surrounding rocks, metals, construction materials come even close Directly to having similar contents,
Through some mechanical " magic" , it suppresses the interaction between what is below it ( earth ) and what is above it ( concrete )

Thus, the thicker and larger the Styrofoam, the More it acts as a Distancing factor for the other earthly materials....for they naturally tend to " understand " each other and attract each other.
So basically " Mercury" stops pulling other " mercury" positioned say 1- 2 feet away. Or more.....

 

[dowser]

I can kind of relate to the Styrofoam buffer zone properties. To me it comes down Not to whether the Styrofoam or gravity exhibit waves, but because it is so light, low density and almost no surrounding rocks, metals, construction materials come even close Directly to having similar contents,
Through some mechanical " magic" , it suppresses the interaction between what is below it ( earth ) and what is above it ( concrete )

Thus, the thicker and larger the Styrofoam, the More it acts as a Distancing factor for the other earthly materials....for they naturally tend to " understand " each other and attract each other.
So basically " Mercury" stops pulling other " mercury" positioned say 1- 2 feet away. Or more.....

The perimeter of Styrofoam is a strong Dowse, because the draining Frequencies above are diverted to the sides, to drain past, the signals don't travel thru Styrofoam, because it's Synthetic, not Organic.
Styrofoam blocks more than other synthetic. Duct tape blocks Dowsing signal also..

 

[dowser]

The perimeter of Styrofoam is a strong Dowse, because the draining Frequencies above are diverted to the sides, to drain past, the signals don't travel thru Styrofoam, because it's Synthetic, not Organic.
Styrofoam blocks more than other synthetic. Duct tape blocks Dowsing signal also..

Same as sound air and light, Frequencies can be directed to a narrow point using Styrofoam.

 

[dowser]

Same as sound air and light, Frequencies can be directed to a narrow point using Styrofoam.

If you saw the movie Matrix, the computer screes with multiple numbers across the screen continuously falling. Frequencies it's representing.
Who ever sci-fi imagined that was spot on.
That is exactly what is happening, and Styrofoam blocks that, causing those above to divert to the sides, and fall past..

 

[Prairie Gazingfox]

If you saw the movie Matrix, the computer screes with multiple numbers across the screen continuously falling. Frequencies it's representing.
Who ever sci-fi imagined that was spot on.
That is exactly what is happening, and Styrofoam blocks that, causing those above to divert to the sides, and fall past..

Yes it makes sense, those above try to flood Styrofoam but they can't. So as soon as they " glide" past it's perimeter, they find the gap. The Void represented by Styrofoam ends there and there they go.
At least in my language, that's how I see it.

Yes I saw the Matrix movie.

 

[dowser]

If you saw the movie Matrix, the computer screes with multiple numbers across the screen continuously falling. Frequencies it's representing.
Who ever sci-fi imagined that was spot on.
That is exactly what is happening, and Styrofoam blocks that, causing those above to divert to the sides, and fall past..

That's what I observed when Dowsing, continuous replication and movement/resonation, all based in number sequences, using 0 through 9.
How does a number sequence or frequency age?
If we are resonated Frequencies, what sequence brings age, and why can't the aging frequency be removed or blocked? Yes, I work on that also..

 

[dowser]

I'm experimenting with the force field created directly above the Styrofoam.
As dropping atoms/Frequencies above the foam encounter the foam, becomes diverted to the sides on a 45 degree plane, to drop at the perimeter, they become congested, and create a Dowsable energy perimeter field.
Anything above the Styrofoam, below the 45 degree plane, is in a force field, blocking quantum frequency resonation..

 

[dowser]

If anyone with a metal detector would run a test with Styrofoam, that would help.
Using 2 inch Styrofoam, is a target signal blocked if covered by foam?
If Styrofoam is directly above the coil, does the depth target signal increase?

 

[Prairie Gazingfox]

I'm experimenting with the force field created directly above the Styrofoam.
As dropping atoms/Frequencies above the foam encounter the foam, becomes diverted to the sides on a 45 degree plane, to drop at the perimeter, they become congested, and create a Dowsable energy perimeter field.
Anything above the Styrofoam, below the 45 degree plane, is in a force field, blocking quantum frequency resonation..

It sounds like substances and emanations in Nature have their own inner encoded behavior and path, and when we block or partially slow those through artificial means , the moment they find an outlet, they accelerate themselves and quickly try to resume course.
Before I sold my Garret 400, I tested with about 45 grams of gold jewelry by putting it inside
- 1 lower density Gypsum type of coin jar that literally had 3 decorative 3/4 inch holes on the side ( onto the height ) and the lid did have tiny gaps
2) 18-8 stainless steel coffee creamer That HAD THICK walls and LID on a hinge BUT around like 180 degrees of the lid there were 3 mm factory gap. So it wasn't shutting totally tightly!
3) average thick glazed darker green Stoneware With VERY THICK and tights lid, like maybe could hold close to 32 OZ contents
* In all these cases, I was swinging the detector from different heights ( they were not buried, just sitting on top of a wooden table),
Except in the 18-8 coffee creamer container,
The detector was not Detecting within the specific range 49 to 75 or so where Gold would fall under.

Even from a height of 5 to 6 inches max, No gold signal was detected. No matter how I changed the Mode and frequencies......
Only in the 18-8 container , NOT BECAUSE it is metal alloy, But Because it had these 3 mm gaps, occasionally the 49 to 75/ 79 numbers would jump.on the screen. Even then, I had to literally glide like only 3 inches above the steel container to cause the signal to be briefly picked up. It was transient.
I do know Chromium and Nickel also ate found within that same range. But I had previously put just some of the gold jewelry onto 2 empty cardboard boxes and saw what most specific numbers for Gold were being displayed. Then after I placed the jewelry into the 18-8 container , these numbers were no longer showing. Only briefly some were displaying, as far as I can remember.

In the Gypsum container, some of the gold jewelry was actually Not on the bottom but only like 2 inches from the lid sitting on top of a wrinkled paper.....

From that point I started understanding that containers, especially thicker and/ or bulkier are able to absorb/ steal from 20 % all the way up to 70 % of the strenght.of the Gold, Silver, copper signals.. of their contents.
Iron absorbs/ steals the most in fact.

 

[robertk]

If anyone with a metal detector would run a test with Styrofoam, that would help.

There are detecting videos posted here from time to time where the targets are on or in styrofoam coolers. They do not appreciably block the frequencies used by metal detectors. Styrofoam is considered basically transparent to RF and other EMF frequencies.

I'm experimenting with the force field created directly above the Styrofoam.

Good luck with that. The only force field you're likely to encounter styrofoam is static electricity.

 

[dowser]

There are detecting videos posted here from time to time where the targets are on or in styrofoam coolers. They do not appreciably block the frequencies used by metal detectors. Styrofoam is considered basically transparent to RF and other EMF frequencies.

View attachment 2218339 View attachment 2218340


Good luck with that. The only force field you're likely to encounter styrofoam is static electricity.

I'm dowsing and testing quantum frequencies, not Rf or Emf ones.