Please Help me ........i need your Help

[mikko2000]

hi friends,

this s Mikko from Finland, i need your help please ! i know many places where there s a gold treasures but the problem as i know is those treasure are about 4 meters deep underground !!

i have a Makro gold racer and i know it didnt go that deep, so i ask if there s some kind of non expensive detector or some kind kind of gold racer hacking coil can let me detect that deep ?? any solution please ??



thank you friends

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[nwpa]

Greetings Mikko and welcome to the forum, a 2 box detector something like a Whites TM-808 might do the job.
I do not know much about these but someone with more experience should chime in.

 

[Terry Soloman]

You need a Pulse Induction machine, and a 8' x 8' coil.

 

[IDXMonster]

Mikko....IF you think you have found the gold,HOW are you going to dig it up? You would need a mini excavator...at least! And unless this is ONE HUGE SOLID MASS...smaller gold items won’t be detected by ANYTHING at that depth. More details on your search would be very interesting!

 

[mikko2000]

nwpa ,Terry Soloman, IDXMonster thanks to you all for the answer, but please i need more explanation and the info about the things i need !!!! IDXMonster i know a place where it can be a treasure not exactley just a gold but it can be silver or anything else, i need something like underground scanner because i know the treasure is deep something 3-6 meter ......that s why i need some more informations how i can get that kind of target !!!!

 

[Tom_in_CA]

Micco2000, "4 meters" is over 16 ft. Or in the case of your 2nd post "3 to 6 meters" is 9 to 19-ish ft. deep. Can I please ask you a question then ? : What is the source of your information that tells you that "gold treasures" (plural) are this deep ? Is it anything beyond the stories/legends that got passed down to you ? If so, I'll bet you dollars to donuts that it's simply a part of the legend(s) as they evolve. It's part & parcel for all good treasure legends to be insanely deep.

So please tell us the source of your information that gives these types of measurements. If it's simply "the story you're reading/hearing", then .... I would be dismissive of it. Because a treasure is equally hidden whether it's at 1 ft. versus 20 ft. As long as the top is covered and fluffed up, then it's not going to be "hidden better" by burying deeper. Hoards and treasures are found all-the-time that are not necessarily deep.

And what is the size of these "gold treasures" ? eg.: a mayonnaise jar size ? A toaster-oven size ? A volkswagon size ? Etc.... We need to know that too, before any recommendations can be made.

 

[mikko2000]

Hi Tom in CA, well it s a really long story but i will try to give all of you some info! the treasure is in my grand mom old house and in the earth there s a old gold coins, silver, the target is a big normal coins ! the treasure is there from the war world 1 AND the target is in old Well and the Well is deep about 3-6 meters friend. now i think you know somthing ! but you make me laugh when you said Volkswagen lol

 

[HighVDI]

Might need the cast of Oak island on site for this extraction!

 

[Terry Soloman]

You would be better off just doing drill holes and core samples at that depth.

 

[smokeythecat]

You can rent a ground penetrating radar unit from a larger rental store, the kind that construction contractors use. It's pretty inexpensive over here, but reading it would be tricky.

 

[IDXMonster]

That sounds like a great hunt you are on Mikko! If a well is involved,just please be careful and hold onto your tools carefully! And...EVERYBODY laughs when someone says Volkswagen...

 

[Tom_in_CA]

I don't understand then. If you know it's in an old well, why do you need any detector that goes that deep? Simply dig down where the well was, or is . Eh ?

 

[RustyGold]

I don't understand then. If you know it's in an old well, why do you need any detector that goes that deep? Simply dig down where the well was, or is . Eh ?

That was my thought exactly.

 

[Tom_in_CA]

If it's a case of "not knowing where the old well was" (d/t perhaps it's capped and grown over now ?) Then figure if the well was lined, you can use a bottle probe to find the casings/sides. Or GPR will show you ground anomolies. Even after 100 yrs. a shaft like a well (or outhouse pit, etc...) will have different soil compaction that shows up on GPR. In which case, you won't need to have detected the treasure itself . Because: Since you've said you "Know", where they are (at the bottom of these wells), then ...... all you gotta do is find the top 1 ft , and dig. right ?

 

[chub]

Ding Dong Bell, ***** in the well.... according to the nursary rhyme there is a treasure of sorts there already

On a more serious note - Is there water in the well?
Is the well filled in?
Do you know where the well is located?

chub

 

[mikko2000]

thanks to you all for the answer , about the friends they talked about the well and it s easy to find wat u want i will say the well is already buried many years ago and no one know where is it on the garden ! now we change the subject from the deep detectors to the well lol, is anyone know about any good deep detector ? what about that kind of gold Long range Locator ? are they really works good ?

 

[TheGreenBoy]

I am using one of the beast PI detectors depth wise i've ever seen, and i've seen a lot of them... it has 4m max. depth for a target forming at least 0,8m of diameter conture or at least 10 kg of mass. There is also a big difference if this is one chunk of metal or at least many small items in direct electric contact or if the target consist of small items scatered without a direct contact to each other. On the other hand, a helmet size object can be found on 2 -3m without a problem.
The deepest detector i'veever made in times of depth-fetish had 8m of depth for 1,7m of diameter target and a pile of lead acid batteries to power it.
If the target is not big enought it will be hard or next to impossible.
Check Russian military 2-coil sistem too, it is able to go as deep as 5m.

 

[boogeyman]

Micco2000, "4 meters" is over 16 ft. Or in the case of your 2nd post "3 to 6 meters" is 9 to 19-ish ft. deep. Can I please ask you a question then ? : What is the source of your information that tells you that "gold treasures" (plural) are this deep ? Is it anything beyond the stories/legends that got passed down to you ? If so, I'll bet you dollars to donuts that it's simply a part of the legend(s) as they evolve. It's part & parcel for all good treasure legends to be insanely deep.

So please tell us the source of your information that gives these types of measurements. If it's simply "the story you're reading/hearing", then .... I would be dismissive of it. Because a treasure is equally hidden whether it's at 1 ft. versus 20 ft. As long as the top is covered and fluffed up, then it's not going to be "hidden better" by burying deeper. Hoards and treasures are found all-the-time that are not necessarily deep.

And what is the size of these "gold treasures" ? eg.: a mayonnaise jar size ? A toaster-oven size ? A volkswagon size ? Etc.... We need to know that too, before any recommendations can be made.

Hey Sheldon, before you go getting all fired up on your debate junk, read the post! He's not asking for a debate or critiques on his search. All he's asking for is guidance on search equipment. The question for him would be is the soil to be searched like most of his area rocks rocks and more rocks. From what he's described, a GPR would probably be efficient in narrowing the area down then probes, a drill like a post hole driller (gas) with a couple extensions & shovels. Next how close is or how much access does he have to sources of equipment. Don't think HF has made it over there for a post hole drill, or his closest source of rod & tube to make extensions could be 50 or 100 miles away.

 

[Tom_in_CA]

thanks to you all for the answer , about the friends they talked about the well and it s easy to find wat u want i will say the well is already buried many years ago and no one know where is it on the garden ! now we change the subject from the deep detectors to the well lol, is anyone know about any good deep detector ? what about that kind of gold Long range Locator ? are they really works good ?

Mikko2000, To recap your information:

a) you "know" places where there's buried gold treasures. That's your post # 1 of this thread. Right ?

b) You know the depth, because it was buried/stashed in a "well" . As you said in post #7. Right ?

Then why is it unusual, as you say in post #16, to change the subject to the "well" ? Seems to me that since you have already established that you know the treasure is in the bottom of the well, then ........ presto : Just find the well. Who cares if you can detect a treasure that deep, with whatever-type equipment can or can't do this task. In your case, by your own statements, you only-need to find the well.

GPR detects ground disturbances. Like, for example, an outhouse pit or filled-in-well (even after 100 yrs.) will have different soil compaction . Then once you'd established where the well in the yard is, you simply dig down the requisite 9 to 19 ft. Right ? After all, you already know it's in there, eh ?

 

[mikko2000]

Mikko2000, To recap your information:

a) you "know" places where there's buried gold treasures. That's your post # 1 of this thread. Right ?

b) You know the depth, because it was buried/stashed in a "well" . As you said in post #7. Right ?

Then why is it unusual, as you say in post #16, to change the subject to the "well" ? Seems to me that since you have already established that you know the treasure is in the bottom of the well, then ........ presto : Just find the well. Who cares if you can detect a treasure that deep, with whatever-type equipment can or can't do this task. In your case, by your own statements, you only-need to find the well.

GPR detects ground disturbances. Like, for example, an outhouse pit or filled-in-well (even after 100 yrs.) will have different soil compaction . Then once you'd established where the well in the yard is, you simply dig down the requisite 9 to 19 ft. Right ? After all, you already know it's in there, eh ?

i mean by i know the place (The Area) the location in General ! if i know the place why i have to come here and ask ?? can i get more informations about this GPR ?