Pyramid Industries shaker table instructions / ideas?

[russau]

A friend of mine acquired a Pyramid Industries shaker table w/o instructions. he has looked over the net for anything on it. anyone have any idea where to look for instructions , or does anyone have anything he could use to set it up correctly and run it?

 

[2cmorau]

Rus, can ya get youir bud post some pics, i am sure we could help, plenty on this site know a thing or two about shakers

 

[Oakview2]

It appears that from lack of information, that Pyramid Industries makes the motion device, and that some other company, supplies the table. Have him post some pics and look for another name plate somewhere on the device. If pics aren't available, some discription of size, shape color of top. Most common are in no particular order, Action minning wave tables, RP-4 shaker table, Goldtron diamond table. Without pics best I can do.

 

[Oakview2]

Shoulda known if it was produced, Hoser would have it in the memory banks

So similar to this.... http://www.keeneeng.com/mm5/merchant.mvc?Store_Code=KES&Screen=PROD&Product_Code=ST1

 

[Joleen]

I also need some help on this table.

 

[Joleen]

Rus, can ya get youir bud post some pics, i am sure we could help, plenty on this site know a thing or two about shakers

 

[Joleen]

I posted the pics of my table. I also need some help with it. I can't find anything on it

 

[Jim in Idaho]

I posted the pics of my table. I also need some help with it. I can't find anything on it

That looks like a Gemini table, but I've never seen one in blue.
Jim

 

[Assembler]

It looks like a 6S Gemini table about the following specs.:

Gemini Shaking Table

【Capacity】0.2-1.5T/H

【Feeding Concentration】15%-30%

【Feeding Size】0-2mm

【Application】Gemini shaking table is a gravity separator machine that can separate Gold, Tin, Tantalum, Niobium, Tungsten, Iron, Chrome, Zircon, etc.,

 

[Reed Lukens]

Usually a shaker table is bolted to a concrete pad. If the frame is moving around and nothing is working right, then this is a good starting point. I'm not familiar with the workings of this table but I have seen them before. I have a Wilfley and there are a number of videos on youtube showing the basics for shaker tables. I've never seen one Not bolted to the floor.

 

[arizau]

I also need some help on this table.

Google "911 metallurgist gemini table". The instructions for their gemini table are towards the end of the description and probably relatable to your table.

Good luck and welcome to the forum.

 

[Joleen]

Google "911 metallurgist gemini table". The instructions for their gemini table are towards the end of the description and probably relatable to your table.

Good luck and welcome to the forum.

Thank you

 

[Assembler]

Thank you

You may want to play or fine tune the stroke length to effect the end knocking to make the values climb away from the tailings.

 

[Assembler]

What is the stroke length of your 6S Gemini table?
Is the stroke length of your table adjustable?
Thanks.

 

[Joleen]

What is the stroke length of your 6S Gemini table?
Is the stroke length of your table adjustable?
Thanks.

I'm not sure. It is up in Alaska atm

 

[Assembler]

I'm not sure. It is up in Alaska atm

Ok thanks.

 

[Joleen]

Google "911 metallurgist gemini table". The instructions for their gemini table are towards the end of the description and probably relatable to your table.

Good luck and welcome to the forum.

Thank you for your time

 

[arizau]

Thank you for your time

You're welcome. Let us know how things work out.