What's new

UPDATED: Thanks Boognish.. 3 hour hunt gave me some silver and a COOL "Whatzit"

silverfreak

Silver Member
Joined
Aug 9, 2007
Messages
4,062
Reaction score
1,077
Golden Thread
0
Location
Wherever Silver's Hidin'
Detector(s) used
Minelab Explorers and E-Trac
Primary Interest:
All Treasure Hunting
UPDATED: Thanks Boognish.. 3 hour hunt gave me some silver and a COOL "Whatzit"

Special thank you to Boognish for researching my "Whatzit" and finding out exactly what it is.

Scroll down below to all the responses and you will see some great pics Boognish provided me with. THANK YOU :thumbsup:

Met up with a buddy yesterday for a short hunt.

Anyway we headed to one of the parks we gave up on a year or so ago.

Over the next 3 hours...neither one of us would dig a wheatie :-\...but we did get 4 silver between us :thumbsup:

Phil told me to pick a good spot to start because I always seem to find something pretty quick.

This day was no different because my very first signal was an iffy deepie...but decent enough for me to give it a shot.

I dug down over 8" and ran the probe. I was surprised when it sang...and the target was still a ways down. :icon_sunny:

I dug a big chunk of dirt out...and from nearly 11" down...out popped a clump with a brown/black coin on edge sticking out...and I mean on edge. :thumbsup:

Now if Gary would have found it...he would have given himself credit for an extra 1/2" of depth like he did when he found a Barber half on edge a couple of weeks ago. ;D

Since I found it though...I have to say Phil and I measured it and it was right at 10 1/2" deep to the top edge of the coin. 11" to the bottom edge though :wink:

I picked up what I thought was a wheatie so Phil and I could see the date on it since it was so deep. ::)

After rubbing it a little though...I saw the glint of silver. :thumbsup:

I thought "no way"...but then what I was sure was a wheatie...ended up being a Barber dime with a hard blackish/brown tarnish coated over it. :wink:

You can see in the pic of the uncleaned coins...you can't even tell it's a silver coin. In fact the back never did clean up.

What a pleasant surprise it was though...to see the silver peek through the outermost edge of the rusted, tarnished crud.

It was a 1902 Barber dime.

About 45 minutes later Phil called me over to watch him dig a plug.

I chuckled as he popped out a big chunk of crap...cussed a little...then chucked it towards the garbage dumpster. ;D

His grumbling stopped though when he instictively ran the probe one more time before filling in the hole...and the probe sang AGAIN! :thumbsup:

From about 8" down..and next to the big chunk of crap came the 1897 Barber dime he found.

We then hunted another hour or so...each finding one merc...but no wheaties.

I also got a big silver cross which I hacked ???...a smashed sterling silver band...then a sweet sterling filagree cross by a set of old volleyball poles. :thumbsup:

The oddball neat finds of the day were the spoon the Phil found..and the big 3" piece I found with the indian chief in full headdress engraved on it. :thumbsup:

I have no clue what it is...so I scanned it dirty first. :D

I then rinsed it and took another pic of it.

About 1/2" from the bottom it has the word CHIEF in big letters. Any idea as to what it is?

I wonder if it couldn't possibly be the old emblem off of an antique Indian motorcycle??

Thanks for viewing...and good luck on your next hunt.
 

Attachments

  • coins181.webp
    coins181.webp
    52.3 KB · Views: 1,055
  • coins182.webp
    coins182.webp
    44.4 KB · Views: 1,038
  • coins183.webp
    coins183.webp
    51.1 KB · Views: 1,029
  • yeticoins.webp
    yeticoins.webp
    30 KB · Views: 1,031
  • yeticoins2.webp
    yeticoins2.webp
    12.9 KB · Views: 987
Upvote 0
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Congratulations on all that silver.
The small cross is a nice find.
roger
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Way to go my friend!!
What coil did ya use? the 6" or the bigger one.
I have been using the 6" 95% of the time and have been doing great with it.
35 silver coins in 3 weeks.
^5 on the barber!!!
hh
dan
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Great story and great job pulling out those deep silvers, especially the on edge Barber. :thumbsup:
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Nice finds. The Chief could be from an Indian motorcycle.
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Nice silver! I agree the Indian thingy is very cool!
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Congrates again, you really know that machine. You and Capt SE have inspired me to add a Minelab SE to go with my DFX. I
think they both have different strength's. I've read most of your posts and I think I have a good feel on settings but I may need a little advice on a few if your up for it. I'm know you get a lot of questions and I don't want to be a bother.
Thanks Joe
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Very nice very nice indeed.

JJ
(Newbie)
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

silverfreak said:
wyattrr said:
I don't know what that is...does it have mounting holes at the top or bottom?? ??? I'll research it... :icon_study: Congrats once again...HH
Actually...yest is does...or did ;D.
On the top I can see where I think one was...but has worn through and broken.
It is also bowed...and not flat. I think that is the way it was made too.

Is Chief written in Cursive at the bottom? It resembles an emblem off a 1915 Indian Motocycle...It had 3 different types of emblems. That one seems to be off the front of the fender...The Emblem or Badge as they call it is put on clips x 2 which are soldered to tank two screws mount the badge to the clips...doing more research... :icon_study:
 

Attachments

  • 8c52_1.webp
    8c52_1.webp
    34 KB · Views: 591
  • chiefs.webp
    chiefs.webp
    33.6 KB · Views: 589
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

what do you think bryce the indian looks like it would be from the bike?? that would be cool . last week i found a top to a lantern for a bike 1890-1910. i kow what you mean about running out of sites ive been picking all my old sites. ya i come up with stuff but onlly after hours and hours of hunting. need a new hot spot. willy.
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help

Always enjoy hearing about the 'happenings' behind the finds..hope you find a new -hot spot to hunt. Is it the camera glare or could the spoon be an early souvenier type ? Or maybe the spoon was used by some kid digging for treasure many years ago....
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

wyattrr said:
silverfreak said:
wyattrr said:
I don't know what that is...does it have mounting holes at the top or bottom?? ??? I'll research it... :icon_study: Congrats once again...HH
Actually...yest is does...or did ;D.
On the top I can see where I think one was...but has worn through and broken.
It is also bowed...and not flat. I think that is the way it was made too.

Is Chief written in Cursive at the bottom? It resembles an emblem off a 1915 Indian Motocycle...It had 3 different types of emblems. That one seems to be off the front of the fender...The Emblem or Badge as they call it is put on clips x 2 which are soldered to tank two screws mount the badge to the clips...doing more research... :icon_study:
Thanks Wyatt...the word CHIEF is done in big letters

JJTheisen said:
Very nice very nice indeed.

JJ
(Newbie)
Thanks JJ

Drdepth said:
Congrates again, you really know that machine. You and Capt SE have inspired me to add a Minelab SE to go with my DFX. I
think they both have different strength's. I've read most of your posts and I think I have a good feel on settings but I may need a little advice on a few if your up for it. I'm know you get a lot of questions and I don't want to be a bother.
Thanks Joe
Thanks Joe. Please feel free to message me anytime and I'll help if I can.

Chicago Ron said:
Nice silver! I agree the Indian thingy is very cool!
Thanks Ron

Dman said:
Nice finds. The Chief could be from an Indian motorcycle.
Thanks D. Thats the way I am leaning too.

daytondigger said:
Great story and great job pulling out those deep silvers, especially the on edge Barber. :thumbsup:
Thanks DD

bluefin1959 said:
Way to go my friend!!
What coil did ya use? the 6" or the bigger one.
I have been using the 6" 95% of the time and have been doing great with it.
35 silver coins in 3 weeks.
^5 on the barber!!!
hh
dan
Thanks Dan. I actually had on the 11" pro coil on this day because there wasn't a lot of trash in the ground. In fact...it was hard to get any signals at all ;D. The 6" will be going back on in trashy spots though.

rodgerdodger said:
Congratulations on all that silver.
The small cross is a nice find.
roger
Thanks Roger

Jaw Jah Danny said:
........"I dug a big chunk of dirt out...and from nearly 11" down...out popped a clump with a brown/black coin on edge sticking out...and I mean on edge. "

11" down on edge ::) newbie here :tard:

What kind of coil did you use?

Do my first dig tomorrow morning. ::) ::)



danny
Hi Danny.
I had on the 11" Minelab pro coil. I also use the 15" WOT coil...the 10 x 12 SEF coil...the 6" Excelerator coil
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help

Fla-Gal said:
Always enjoy hearing about the 'happenings' behind the finds..hope you find a new -hot spot to hunt. Is it the camera glare or could the spoon be an early souvenier type ? Or maybe the spoon was used by some kid digging for treasure many years ago....
Hi Fla Gal.
I've been hunting since about 1972...and sad to say...my parks are finally drying up on me. ???
As for the spoon...I'm not sure. It's so corroded I can't make out if there is anything on it or not :wink:
Thanks for responding



dfx willy said:
what do you think bryce the indian looks like it would be from the bike?? that would be cool . last week i found a top to a lantern for a bike 1890-1910. i kow what you mean about running out of sites ive been picking all my old sites. ya i come up with stuff but onlly after hours and hours of hunting. need a new hot spot. willy.
It's definately from the bike Willy. I haven't hunted a new site in years...so it's time I find some.It's hard for me to drive far though...because my dad's health isn't good.
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

Sometimes it is just cool to sit back and watch a post go through its stages...Started with some great finds, needed ID on the Chief thing, then it comes to a positive ID...Great stuff Bryce, I love those whatsit things. It amazes me that people can get an ID on just about everything here. Congrats on the successful hunt again Buddy.. :thumbsup: jgas
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help??

10-1/2" on edge,on a Barber dime, now that is impressive. That's 3-1/2 " deeper than my deepest coin.
 
Re: UPDATED: Thanks Boognish.. 3 hour hunt gave me some silver and a COOL "Whatzit"

Great finds Bryce! The Indian Chief bike tag certainly would have made anyone's day, and the sweet silvers were the icing on the cake!

Jim
 
Re: UPDATED: Thanks Boognish.. 3 hour hunt gave me some silver and a COOL "Whatzit"

Bryce , stunning finds man ! I absolutely love the smaller silver cross - that alone would have made my day .

The chief emblem is terrific as well . Thanks for the inspiration - Argentium.
 
Re: 3 hour hunt gave me and a buddy some silver and a BIG "Whatzit" for me. Help

Boognish said:
Cool find. According to the link below, "It's from a Chief bicycle built around 1915 by the Davis Sewing Machine Company and sold by Sears."

Check out the link:
http://images.google.com/imgres?img...%22+logo&hl=en&client=safari&rls=en&sa=N&um=1

Awesome Id Boognish. I was going to message Bryce and ask if it had a hole at the top and the bottom. I was thinking bicycle head badge like the Schwinns that I have laying around. Just couldn't find any photo's of Indian bikes.

HH DJH
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom