I need to correct one of my bearings I gave out, It's actually the 202.5/22.5 line not the 337.5 . I must have had that 337.5 in my head from another spot we were measuring to on a spot behind the A frame more in the creek watershed bottom. Anyways between the A frame and the shaft sign its 22.5/202.5 degrees which is still a 16 or 32 point compass (still 66 feet between them). We dug in line at 33 feet from it (lining up the shaft sign larger boulder and the A frame into the hillside dead across the trail, but did not hit it. We got a possible marker at about 2-3 feet deep which I should have hand dug, shaped exactly like the A frame face which probably pointed. We have a another nearby spot that goes exactly perpendicular off the face of the A frame on the 225/45 degree line into the hillside across the trail ( which is a 22.5 degree turn )which we will try in a couple weeks. There's more but it gets complex explaining it in an easy to understand fashion with bearings and measurements and markers. There is another A frame above on the hillside that kind of has a shaft symbol on it but it's done as a filled space made of two fractures instead of empty space shaft sign. Anyways we are not done there yet.