What's new

H3 element detector

Water Dowsing isn't as easy as you must think.
But I can signal water using a bottle of water.
Distant lakes, neighbors pools, septic tanks full of liquid.
Water Dowsers that Dowse for water, are Dowsing for a underground moving spring, not a aquifer.
The difficulty associated with water Dowsing is confirming the depth of the signal.
It's really difficult to locate a half strength depth halo, on any deep target.
If a water stream is 200 ft down, to know that, requires a 200 ft depth halo located.
My well is drilled into sand at 100 ft, all aquifer.
Dowsing isn't required.
The well that my parents had put in, on the shore of lake Huron, was 15 ft deep, and drilled into a underground spring, flowing through the clay.
My Dad had used a Dowser to locate the spring.
There is no aquifers in that area, like other areas use Dowsers.
It depends on the area..
Thinking more about it, I believe it was only 15 ft deep 4 or 5 ft wide circumference.
I was around 13 yrs old, and we would purchase shiner minnows, and keep them down in the well, in a bucket, until early morning perch fishing.
Some small minnows had gotten out through the holes, and we could see them living down in there.
I wonder what new owners must think seeing minnows living in their drinking water well..
 
I messed with using a magnetometer to calculate the frequency while locating near real time but the magnetic field is changing all the time and kinda like playing Whack-A-Mole.
 
Last edited:
I messed with using a magnetometer to calculate the frequency while locating near real time but the magnetic field is changing all the time and kinda like playing Whack-A-Mole.
It's called Diurnal Variation!

Diurnal variation:

Geophysics & Magnetism: Regular, daily wave-like shifts in the Earth’s local magnetic field caused by electric currents in the upper atmosphere (ionosphere) interacting with solar radiation. :thumbsup:


- Geowizard
 
Thinking more about it, I believe it was only 15 ft deep 4 or 5 ft wide circumference.
I was around 13 yrs old, and we would purchase shiner minnows, and keep them down in the well, in a bucket, until early morning perch fishing.
Some small minnows had gotten out through the holes, and we could see them living down in there.
I wonder what new owners must think seeing minnows living in their drinking water well..
Well...? :icon_study:

Placing minnows or mosquito fish directly into a functional drinking water well is not recommended and generally unsafe because it poses severe risks to groundwater safety, water quality, and public health.

Why Minnows Do Not Belong in Drinking Water Wells

• Bacterial and Viral Contamination: Fish produce biological waste (ammonia and feces) and can die and decompose in a closed subterranean shaft. Decaying fish flesh introduces dangerous bacteria (such as E. coli or coliforms) and foul odors directly into your drinking supply. :thumbsup:



- Geowizard
 
Well...? :icon_study:

Placing minnows or mosquito fish directly into a functional drinking water well is not recommended and generally unsafe because it poses severe risks to groundwater safety, water quality, and public health.

Why Minnows Do Not Belong in Drinking Water Wells

• Bacterial and Viral Contamination: Fish produce biological waste (ammonia and feces) and can die and decompose in a closed subterranean shaft. Decaying fish flesh introduces dangerous bacteria (such as E. coli or coliforms) and foul odors directly into your drinking supply. :thumbsup:



- Geowizard

Plus drinking water from a Dowsed well, made me a Dowser.
 
Only if you add Kool-aid, water is non-conductive without electrolytes 😂
No need to add Kool-aid as the dead fish will add a conductive factor.......:-\
 
3RDLIFE said, Only if you add Kool-aid, water is non-conductive without electrolytes 😂

FALSE!

Kool-Aid mixed with water and sugar is a very poor conductor of electricity, similar to plain sugar water.


Why It Is Not Very Conductive

• Ions Are Required: Electrical conductivity in liquids depends on the movement of free-floating ions (charged particles).

• Sugar Dissolves into Molecules: Standard Kool-Aid mix contains mostly sugar (covalent molecules) and flavorings. When sugar dissolves in water, it breaks into neutral molecules rather than splitting into charged ions, meaning it does not carry an electric current well.

• Water Baseline: If you mix unsweetened Kool-Aid in pure (distilled) water, it has virtually no ions and acts as an insulator. If you mix it with tap water, it will conduct electricity only as well as the tap water itself does (due to trace minerals already in the tap water), not because of the Kool-Aid mix.

(Note: Unsweetened Kool-Aid does contain a small amount of citric acid for tartness, which can create a tiny number of ions, but not enough to make it a strong or effective conductor like salt water or sports drinks that contain high levels of electrolytes.).

- Geowizard
 
3RDLIFE said, Only if you add Kool-aid, water is non-conductive without electrolytes 😂

FALSE!

Kool-Aid mixed with water and sugar is a very poor conductor of electricity, similar to plain sugar water.
I'm pretty sure it was a joke. Nobody is seriously concerned about the conductivity of Kool-Aid. (Well, almost nobody, apparently.)
 
Assembler said, "No need to add Kool-aid as the dead fish will add a conductive factor.......:-\"

Maybe,

Dead fish are somewhat conductive because their bodies contain water, electrolytes, and organic tissues, though they are generally less conductive than saltwater and vary depending on their environment.

Conductivity Factors

    • Freshwater vs. Saltwater: A live or dead fish in freshwater typically has higher electrical conductivity than the surrounding water, causing electric current to pass through the fish rather than the water. In saltwater, the high concentration of dissolved ions makes the ocean much more conductive than the fish's body, so electricity prefers to flow around the fish.
    • Moisture and Decay: A dead fish retains water and salts in its cells, meaning it will conduct electricity—especially if it is freshly dead and wet. As it dries out or decomposes, its conductivity changes.
    • Post-Mortem Muscle Activity: Even after death, residual chemical energy and ions in a fish's nervous and muscular tissue can react to external stimuli (such as salt or an electrical current), causing the tissue to twitch or conduct signals briefly.
    - Geowizard
 
Assembler said, "No need to add Kool-aid as the dead fish will add a conductive factor.......:-\"

Maybe,

Dead fish are somewhat conductive because their bodies contain water, electrolytes, and organic tissues, though they are generally less conductive than saltwater and vary depending on their environment.
Dude. Seriously. Tell your chatbot to stop responding to posts.
 
Can you feel the frequencies increasing when one drinks the water?
I didn't notice any better Dowsing signal when,
I tried Electrolytes, but only drank it one day.
Nasty tasting to me.
 

Attachments

  • IMG_20261030_064240946.webp
    IMG_20261030_064240946.webp
    675.5 KB · Views: 5
Assembler said, "No need to add Kool-aid as the dead fish will add a conductive factor.......:-\"

Maybe,

Dead fish are somewhat conductive because their bodies contain water, electrolytes, and organic tissues, though they are generally less conductive than saltwater and vary depending on their environment.

Conductivity Factors

    • Freshwater vs. Saltwater: A live or dead fish in freshwater typically has higher electrical conductivity than the surrounding water, causing electric current to pass through the fish rather than the water. In saltwater, the high concentration of dissolved ions makes the ocean much more conductive than the fish's body, so electricity prefers to flow around the fish.
    • Moisture and Decay: A dead fish retains water and salts in its cells, meaning it will conduct electricity—especially if it is freshly dead and wet. As it dries out or decomposes, its conductivity changes.
    • Post-Mortem Muscle Activity: Even after death, residual chemical energy and ions in a fish's nervous and muscular tissue can react to external stimuli (such as salt or an electrical current), causing the tissue to twitch or conduct signals briefly.
    - Geowizard
If it's about Dowsing, it is all a joke, I don't mind.
The joke is on me.
To chase the Dowsing signal 20 yrs, only to watch it weaken then quit.
The whole time arguing with disagreement about reality.
 
Based on this AI summary;

"Helium-3 is a rare, non-radioactive isotope of helium that has accumulated on the lunar surface over billions of years from solar wind bombardment. Because Earth's atmosphere and magnetic field deflect the solar wind, the gas is virtually non-existent on Earth, where current supplies cost roughly $20 million per kilogram."

View of the European Space Agency:


This links back to the wiki page:


"Neutron detection

Helium-3 is an important isotope in instrumentation for neutron detection. It has a high absorption cross section for thermal neutron beams and is used as a converter gas in neutron detectors. The neutron is converted through the nuclear reaction

n + 3He → 3H + 1H + 0.764 MeV

into charged hydrogen isotopes, tritium ions (T, 3H) and hydrogen ions, or protons (p, 1H) which then are detected by creating a charge cloud in the stopping gas of a proportional counter or a Geiger–Müller tube.[55]"

Also:

"Nuclear magnetic resonance

Helium-3 nuclei have an intrinsic nuclear spin of ⁠1/2⁠ ħ, and a relatively high gyromagnetic ratio. Because of this, it is possible to use Nuclear magnetic resonance (NMR) to observe helium-3. This analytical technique, usually called 3He-NMR, can be used to identify helium-containing compounds. It is however limited by the low abundance of helium-3 in comparison to helium-4, which is itself not NMR-active."

Hope this helps!

- Geowizard
I knew that.
 
I didn't notice any better Dowsing signal when,
I tried Electrolytes, but only drank it one day.
Nasty tasting to me.
Glad you've got a thick skin about all the grief you get. I just block people if they're too annoying.
 
I didn't notice any better Dowsing signal when,
I tried Electrolytes, but only drank it one day.
Nasty tasting to me.
I hope you can understand that there are many who have also tried dowsing for one day as well.
Perhaps if they stick with it some results may happen.

You point out that over 20 years the signal is very weak today.
Perhaps this will also reflect on some people's viewpoint on dowsing today.
 
I hope you can understand that there are many who have also tried dowsing for one day as well.
Perhaps if they stick with it some results may happen.

You point out that over 20 years the signal is very weak today.
Perhaps this will also reflect on some people's viewpoint on dowsing today.
I can't figure out what changed.
I have it narrowed down to either, the Transmission or the Reception of the Dowsing signal has changed..
 
Last edited:
I can't figure out what changed.
I have it narrowed down to either, the Transmission or the Reception of the Dowsing signal has changed..
One possible impact is taking a good look at all of the products that have radio tags / receptive chips on them now. Another is the smart meter systems.
There are frequencies needed to make these systems work / function.
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom