woodknack
Full Member
- Joined
- Feb 2, 2015
- Messages
- 170
- Reaction score
- 42
- Golden Thread
- 0
- Detector(s) used
- USING-Tesoro DeLeon, Vaquero, Compadre
OWNED-Bounty Hunter Platinum, Whites Classic II
- Primary Interest:
- All Treasure Hunting
- #1
Thread Owner
Hey guys I have a 7" compadre. I wanted to mark the coil for a better sight picture. I really didn't like the tesoro sticker on the coil, plus its winter and I am cooped up and bored!
Before

Time to take the sticker off. I used goo gone to do this.

All cleaned and the coil marked.

I used red electrical tape as my sticker. I used a hole punch to make the dot for the center on the coil.

Then just cut 3 other pieces in a pie shape.

And the finished product. I may change the 3 red triangle pieces later with some lightning bolts like Digger27 suggested! This was just something to do to kill some time productively.


Before

Time to take the sticker off. I used goo gone to do this.

All cleaned and the coil marked.

I used red electrical tape as my sticker. I used a hole punch to make the dot for the center on the coil.

Then just cut 3 other pieces in a pie shape.

And the finished product. I may change the 3 red triangle pieces later with some lightning bolts like Digger27 suggested! This was just something to do to kill some time productively.

