Need a ID on this name plate???

Lpetite

Jr. Member
Joined
Nov 11, 2015
Messages
43
Reaction score
86
Golden Thread
0
Location
Gonzales,LA
Detector(s) used
Garrett AT Pro
Primary Interest:
Metal Detecting

Attachments

  • image.webp
    image.webp
    665.9 KB · Views: 101
Trunk/Luggage tag with the name and address of the owner on it, RFD is Rural Free Delivery.
 

Last edited:
Upvote 0
Sweet thanks any idea on a date and best was to bend it back straight?
 

Upvote 0
RFD was in use up until 30-40 years ago I believe. I have straightened back to flat items by this method...two flat pieces of wood on either side of the tag, place the sandwich in a bench vise and SLOWLY crank it down. Finish off the flattening with a rubber/plastic mallet on a flat hard surface. Sub 8-)
 

Upvote 0
When I try to straighten bent items, I hold them with pliers, and put the item into boiling water for a while. I think the heat may help. but you have to work fast when you take it out of the water. Sometimes I'll use 2 pairs of pliers and straighten it under the water.
 

Last edited:
Upvote 0
Depending on it's size my guess would be a name plate off of a dog collar...d2
 

Upvote 0
I'd agree with d2, I've found a few of the old dog collar tags around here, they were pretty common for hunting dogs
 

Upvote 0
Trunk/Luggage tag with the name and address of the owner on it, RFD is Rural Free Delivery.

Just to add: As to age of this tag:

Rural Free Delivery ("RFD") was authorized by the Congress in 1890, but it took a while to catch on.
According to the UPSP website, RFD began in 1896, though only experimentally in West Virginia.
A year later (1897), RFD had expanded to 44 routes in 29 states (possibly including Louisiana, although the link does not say).
So, your tag potentially dates as far back as 1897, but likely no further.

https://about.usps.com/publications/pub100/pub100_020.htm
 

Upvote 0
Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom