What's new

One Yard, 11 Pits and all kinds of Glass Eye Candy!!

jgas

Silver Member
Joined
Apr 23, 2008
Messages
3,826
Reaction score
2,753
Golden Thread
1
Location
Midwesterner
🥇 Banner finds
1
Detector(s) used
DFX, Pro 6000XL, SunRay Probe, Centech Pinpointer
What an enjoyable yard this turned out to be for Don and myself. We have been to this yard for 3 or 4 days worth of digging and each time out we found more glass and more pits. But as the saying goes, it has to come to an end at some point right?:icon_scratch: Well I think that day finally came. We knew we had a shallow pit, trash pit area to do so I got there just before Don and started to get dirty. About a foot or so under the soil I uncovered a blob beer from around 1890 or so. Great start:thumbsup: Then I kept on digging and saw several more just below that. It took everything I had not to pull all of them out before Don got there, but I surprised myself and just sat on a clump of grass until he arrived, which felt like an hour but was more like a minute:laughing7:

He saw the first bottle I pulled out and he practically dove head first into the pit after the next one.:headbang: It was one blob beer after another for a while there. The great part was that most everything was intact. Then I saw the mini whiskey jug. Pulled it out and yep, it was whole, handle intact and little wear. :icon_thumleft: Then it was Don's turn and he saw the base of a seltzer bottle. Now mind you, we have never pulled one of these out whole.:BangHead: But our chances were good for this one. He pulled it out of its resting place and sure enough it was whole, top still in tact and a bonus that it was acid etched with Henry Stein of Plymouth Indiana. :occasion14: That's what I am talking about. Cool finds like that keep us digging for more history of the area. After all was said and done on this "little pit", we pulled out about 14 beers, a jug, the seltzer and a few others.:headbang:

Don thought we were done, but alas it was not to be...Near the back of the garage we probed around and sure enough pit number 9 and counting. This one was deep by this yards standards, around 8 feet. So we charged in like mad ground hogs and started to find more beers. Later stuff but not bad. This pit was also filled with sand as a huge cap to cover the use layer. That stuff is heavy...But we made it through to find a few more keepers to end the day. But as a rule of thumb, we always probe to the sides when we are that deep to see if we can reach another pit nearby. Sure enough pit number 10 was 2 feet away right behind the garage:thumbsup: And this one was around 9 feet deep. So we came back the next morning and tore into this one just to keep warm. It was about 30 degrees and windy.

After an hour of digging we finally were able to get to the use layer that was about a foot thick. We pulled out a nice milk and some more beers. Then like the day before Don saw another seltzer base. He pulled this one out but it was not etched, but it did have the top nozzle still intact. Crazy after all these years. It was protected a bit by the garage from the elements! We finished this pit with a pile of beers, some blank milks and a cool mini mason that appears to be a late throw. Then Don said that was it for this yard....I beg to differ, so I probed a bit more and found a small trash pit that ended up being some rust, broken shards of 1920's stuff and a broken straight sided coke:BangHead: Oh well, this yard was toast now, or so I thought. I probed and probed in hopes of another to make it an even 12, but it was not to be. Don did find two more just across the fence in a vacant lot, but I will have to get the owners permission to do those. I will politic a bit and keep my fingers crossed for a future dig there. I hope you enjoy the pictures, there is plenty of glass eye candy to look at. Not the ones of Don or me of course:tongue3:. All in all I would estimate 300 to 400 bottles were tossed into all these privies and trash pits. We kept a few to say the least. As always be careful out there and good luck on your next treasure hunt!!:thumbsup: jgas
 

Attachments

  • w1.webp
    w1.webp
    77.4 KB · Views: 156
  • w2.webp
    w2.webp
    82 KB · Views: 135
  • w3.webp
    w3.webp
    43.4 KB · Views: 118
  • w4.webp
    w4.webp
    55.3 KB · Views: 139
  • w5.webp
    w5.webp
    87.8 KB · Views: 146
  • w6.webp
    w6.webp
    57.6 KB · Views: 134
  • w7.webp
    w7.webp
    35 KB · Views: 127
  • w8.webp
    w8.webp
    44.5 KB · Views: 149
  • w9.webp
    w9.webp
    65.3 KB · Views: 128
  • w10.webp
    w10.webp
    66.7 KB · Views: 155
  • w11.webp
    w11.webp
    34.9 KB · Views: 131
  • w12.webp
    w12.webp
    53.6 KB · Views: 131
  • w13.webp
    w13.webp
    76.2 KB · Views: 122
  • w14.webp
    w14.webp
    39.2 KB · Views: 127
  • w15.webp
    w15.webp
    52.9 KB · Views: 144
  • w16.webp
    w16.webp
    77.6 KB · Views: 134
  • w17.webp
    w17.webp
    74.7 KB · Views: 135
  • w18.webp
    w18.webp
    76.5 KB · Views: 151
  • w19.webp
    w19.webp
    65.2 KB · Views: 136
  • w20.webp
    w20.webp
    53.4 KB · Views: 140
  • w21.webp
    w21.webp
    34 KB · Views: 130
  • w22.webp
    w22.webp
    53.7 KB · Views: 148
  • w23.webp
    w23.webp
    38.9 KB · Views: 134
  • w24.webp
    w24.webp
    51 KB · Views: 138
  • w25.webp
    w25.webp
    27.8 KB · Views: 122
  • w26.webp
    w26.webp
    39.3 KB · Views: 149
Upvote 10
Man, that's cool. I really need a chance to do this someday!
 
Amazing!!!!!! I just got a probe cant wait to give it a try, Thanks for the advice. HH coop
 
Thanks for the replies guys. I hope to get the big permit to do the other side of the fence! Fingers crossed......jgas
 
Congratulation!!
 
Nicely done! I am curious, your probe only looks to be about 3 feet long, yet your pit looks to be 8 or 9 feet, what made you pothole there?
Great bottle finds, will be curious to see them cleaned up and identified!


As a suggestion, I would invest in a fiberglas t probe, I have used both, but find the fiberglas probe does not bend, and should you 'locate' underground electrical, you will live through the experience....mine was $50 at a survey supply company.
I also use a drill probe, which has an 8 inch long 2" diameter drill bit, with 3 foot fiberglas sections. These can be screwed together, to go as deep as you have sections.
 
wow that's a lotta glass. I really like old bottles, but man they sure take up a lot of room
 
Thanks AUVNAV for the tips. Always like to hear new innovative ways to find pits. Actually we have several different sizes of probes. One is 4 feet and one of 6 feet. You can usually hit the layering within a couple feet or so. But there are times I wish I had a 10 footer! These are spring steel probes and hold up nicely to bends. But I shall say I may invest in a fiberglass one and check it out. Thanks buddy.
I will try to get them cleaned up for some other pics soon.
 
I think you will like the fiberglas...I root out the auger and post some pics....
 
Gas, I bow before you,,,,,,,,,,,well ,not really :laughing7: That was one heck of a yard !!!!! bout time for a new shovel huh ,it should be pretty rounded by now . :headbang::headbang::occasion14:
 
What are the turquoise colored things in the pic about midway through your pictures? It looks like a set of teeth?:dontknow: If so, then...YIKES! If not, never mind!:tongue3:
 
Hey Pikes and terryo, thanks for the replies pallies! The turquoise things sticking out the side wall is actually ringlets for a shoe or boot. We find them all the time in privies. Not sure how the heck you lose your shoes in the toilet...LOL And Pikes, I do need a new shovel. A BobCat, ditch digger will do! Ha....Take care all, we will be back at it soon I hope....but I gotta get to cleaning the bottles that are taking over my garage...Yikes! jgas
 
Continually diging a TON of glass! My hats off to you guys! :occasion14:
 
great finds, cant wait to see the clean pics! ive never dug an old privey yet, so do you check for the feel of glass with the rods, and if so do you still dig if you dont feel anythig?
 
thats so cool, I know of alot of privys to dig, but its hard to tell if they have been hit already, I guess thats were the probe comes in. I find square depressions with scatterd broken shards of glass all around them. I kinda figure if theres broken glass around the depression, then the pit must have been dug.
cool finds, hope you get to do the other side,
Pro-
 
thats so cool, I know of alot of privys to dig, but its hard to tell if they have been hit already, I guess thats were the probe comes in. I find square depressions with scatterd broken shards of glass all around them. I kinda figure if theres broken glass around the depression, then the pit must have been dug.
cool finds, hope you get to do the other side,
Pro-

Prolab, I take it you are talking about rural privies. Very, very few rural privies have been located and dug out. Most of what I see people posting is stuff dug in yards in cities and towns. Dig down there and post what you find! Should be some great stuff in the age of the trash pits at the sites you hunt.

Cheers,

Buckles
 
Yep, Buckles is right. The farm ones most likely have never been hit. Use the probe and feel for the layering. If it feels the same all the way down and no crunchy use layer at the bottom then thats one I would bypass.....maybe....oh what the heck, I would do a test dig to see whats going on down there. The broken shards you speak of are most likely newer items that are just fill as the pit gets a depression over time.. Thanks for the replies everyone, hope to get out again real soon. jgas
 
Hey man I think I see daylight and a china man at the bottom of that hole :laughing7: Awesome bottles !!!
 

Users who are viewing this thread

Back
Top Bottom