What's new

Dimes: date check OR rim check?

Dozer D

Silver Member
Joined
Feb 12, 2012
Messages
3,360
Reaction score
3,083
Golden Thread
0
Primary Interest:
Other
I'm a dime CHR doing 8-12 boxes a week. I also date check all my dimes. By doing so I find several 2009's, some proofs (rare), and naturally silver Rosie's &Merc's. I'd like to increase my box volume, which would cause me to rim check only. What do I stand to loose (other than 2009's & proofs) by rim checking?
 
Upvote 0
You won't lose proofs by rim checking. I only rim check and I've found five proofs so far. The rim is noticeably wider on a proof.
 
Thats about it- I never face checked dimes-

-------------------------------------
just keep stacking, just keep stacking, stacking stacking stacking
 
What are your averages? And where are you located? And how do you dump? :P haha
 
i rim check then sound check my dimes, I've missed quite a few silver dimes rim checking but have saved a couple from being dumped back into circulation by the sound check i do in my hand after the roll is searched. It's hard to explain how I soun check but it works... date checking 8-12 boxes a week must strain the eyes!
 
These boxes of 250 or 500 bucks worth?
 
I would only edge check unless you live near Ohio. That's where the 1982 no P dimes were discovered. You have a reasonable chance of finding one with large volume. Otherwise go for silver.
 
How do you have the patience to date check all those dimes?

Just rim check and if anything looks like it could be a dirty silver or something interesting take a look at it.
 
Last edited:
I've found a few proofs edge checking. And I'm not a 2009 hound.
It's up to you!
Wicka
 
off topic, but i found a 2009 nickel accidentally while checking for pre 1960 ones in a nickel roll. I don't keep an eye out for them but keep them if i stumble across one :)
 
I couldn't even imagine date checking dimes. I'm just after silver and I don't think I miss any. Also I reroll most of my dimes so I need to keep them in a nice straight line in my hand so I can slip them into a wrapper in one smooth motion. I've gotten really fast at it.
 
The only thing you have to lose by checking dimes is when unscrupulous customers put pennies in the dime rolls (when your picking up customer rolled stuff) and you lose .09 cents on your investment. I have had that happen to me a couple times... Now I check a couple of of the rolls per "batch" of customers. From the solid boxes of $500 I find that they are easier to open than the Halfs and I have actually lately been getting better percentages on the dimes than the Halfs. This week I picked up $5000 in dimes and each box netteda minimum of 1 silver dime... The biggest box had 4. I put them thru a machine - I'm 35 and for some reason my eyes aren't able to see the silver when I visually sort. Happy hunting.
 
I rim check only. I don't have the time to face check 8-12 boxes a week.

suggestion: If you want to know what you are missing by rim checking only, you have to test yourself. rim check then face check and see what you have missed. the more boxes you do like that the better your understanding of the situation will be. only then will you know.

if I post that I rim check 8-15 boxes a week and never miss anything, that doesn't really have any bearing on anyone else?
 
Even if you miss the occasional proof, what are u really missing? They have been circulated and damaged. Sounds like alot of extra work for minimal return.
 
As if date searching cents and nickels wasn't bad enough. Rim searching is the way to go for everything else. Check out all the nice sharp rims if you're looking for proofs, varieties, errors, etc. I've found a small handful of non-silver keepers simply by looking at all the coins that appear to be in good condition based on the rim.
 
You won't lose proofs by rim checking. I only rim check and I've found five proofs so far. The rim is noticeably wider on a proof.

I just recently switched from date-checking to rim-checking (80+ 2009's is enough for now!), and I would have missed my first-ever proof dime today (1984) if I hadn't read this post earlier in the week. Thanks for the tip!
 
Even if you miss the occasional proof, what are u really missing? They have been circulated and damaged. Sounds like alot of extra work for minimal return.

I only rim search and I think this is the best approach to Dimes. I mainly search Dimes and have only found 2 proofs. They are a nice foot note to the silver, but not good for much else. Another good way know if you are missing anything is to pull foreign coins (which all have a solid/non clad looking rim) and see if any turn up in your dumps. That way: if you see foreign coins in your dumps: you know you are missing possible keepers. I have no doubt that I have missed a proof or two, but I find the volume of rim searching to be a worth while trade off.
 
Used to be a time they thought you crazy for searching dimes. Nowadays, everyones crazy.
 
I think I answered my own question. While going thru a dime box yesterday, was about to do only RIM checking, came across some very dirty/stained rims. Looking at the rims much closer & slower, I then realized that this one was silver. Had I just rushed and looked quickly for the "pretty white rim ones" I would have missed it, had I not date checked. There was a second roll in the same box, same situation. Total for box: 3-Rosie's.
I think I'll continue to date check, avg box takes me 1 hr. 20 minutes. To me it's a Hobby, not a money making venture that "I have to make my quota", or else throw in the towel.
 
I see 2009 rosie's go for about $1.45 on ebay with free shipping. if you can get them mailed for normal postage, after fees that's somewhere in the 85 cents range. Do you save these up by the roll then?
 

Users who are viewing this thread

Back
Top Bottom